Viewing all customer Discussions for:

Other

Visible glass - 28 7/16" W, 19 15/16" H Numbers on Sash balancer - 11600-17 731 043 5/02

I need to replace two roller sets for my Marvin clad ultimate sliding door as they rusted in a flood. The model number on the door is NFR 269/270 and the catalog number was CN 5070.

Casement window controller. It opens but will not close

Looking for the seal that seals the two slinging doors when closed together

i bought a new house, and two windows need a spiral balance mechanism replacement. One balance mechnisem is completely missing. I measured the length between the upper scerw and the bottom sash and it is 17'. the second window got broken mechanism. and by the same method of measurement it is 24.5' ... (cont.)

hello, I am trying to figure out the correct non tilt block and tackle sash balance. the sash is 20x37 thank you for your help.

Help. I have 10 triple awning windows and most of the cranks are broken.

Looking for replacements for this: 1/2" wide spring 5.5lbs 39" travel, 62" length of coil spring

Window balance. Do you have these in stock? 31 5 KC CMC 2 Thank you!

I have a Standley dresser and some of the drawer glides are broken. Kenyon rite trak11. I'm not sure about the 11 Pat. Pending 8485 120 6116706 W6

Hello, Old house; new to us. We are hoping replacement of these rollers will do the trick. The wheels appear to be nylon and have these words on one side: SYRACUSE NY TORONTO, CANADA KILIAN. They seem to be 1.25" in diameter and 3/8" wide. The largest piece of the housing is 3 1/6 by 1 1/16 by 11/16 ... (cont.)

This is 2inches long and 3/8 thick for tilt window lock catch. Thank you

The stamp number id 2950. After the four digits, there are three letters printed at ninety degrees from the 2950 number. The letters are "BSI". Then there are two more letters . . . TT.

The string inside my window sash broke and I'm trying to figure out what to replace it with. Stamped in metal is 26 5. Also BSI and RM. The length is 27 inches. The channel width is 1/2 inch.

The length is 13.5. I need two of these.

Pella screen door rollers with Hook on bottom

we took the locking handle off to try to repair & the door was pushed closed & the latch in the door is not in the lock position (i guess) because we cannot open the door. both sides of the handle were taken off. (Patiorama sliding glass door handle)

Door handle is 7 1/4 long, bolts are 5 inches apart.

I need these in these colors (Almond, Fossil, White). These are 5" long and 3/4" in diameter with a 1/8"+/- slot

I just purchased #82-398 atrium door lever lock set. Do you have them without the lock set for the other door that doesn't lock? Thanks!