Viewing all customer Discussions for:

Other

Commercial aluminum storefront door felt weatherstripping 1/2" x 11/16"

I have old Alcan sliding doo 2 panel 10' opening. It doesn't have roller insert in has wheel attaches to 2 bars that are pined through bottom aluminum piece of door any help pointing me in right direction

I have a broken awning window lock. (Hook shaped part that pulls window in tight when closed) Unfortunately I don't have a picture of the part, removed. I don't see a name on the window anywhere.

It appears a window channel balance has broken. After looking at your web site I believe the 28" S795 option D might resolve my broken channel balance. I have included pictures showing the non-function channel balance for your review. The only stamp on it is 10/15/03 Unigue Balance 27D. Thank you ... (cont.)

Have an exterior metal frame patio door with 4 panels 72 x 80 inches and a screen with a pull up latch to secure the door from the interior only. Photos of latch attached. I need to install a keyed system instead of the latch so that entry to the basement can be attained from the external patio. THE ... (cont.)

clips are white plastic ,small split post appearance with projection to hold sreen probably 20 yrs old.no model # seen .2 fans

Window will not stay open and the sash balance looks like this on both sides. I believe the coil is broken. I can't find any replacements that look like this nor information on how to replace this style. I added photo from top of sash as well.

Hi swisco Wondering what is replacement part for this item? Windows installed by prior homeowner before 2015. Window tilts in and down, just need left side replacement part but interested in knowing right side replacement part too. Your you tube video helped show me how to safely remove! Thanks! ... (cont.)

Can you please tell me which keeper is the correct part for my sliding door? I uploaded a pic of the door label. Thanks I'm advance! David

Please see photos. I have 2 windows with this broken plastic piece. Looking for replacement parts.

Sash are wood with center sash tilt. Balance are 32" long with cord loop to hook on center of sash. The spring in balance is 15" long. Part no. On balance is 32252

Hi, I'm trying to find replacement window operators for my front room windows. this is a 1950s vintage house with probably same windows installed. I have attached pictures. I am not picky about what color or style, as long as it's something that works. thanks Dave

Hi, I have some Andersen casement windows from 1993. The glass logo reads "CIG-1 1-94.6". My windows beads reads "PSC .625 CN1AN1 38741050611804// 09/10/93 1145214 6350 REF #48"Do you have any similar windows beads that could replace the broken originals.Thanks,Mihai

Please help me to identify the broken channel balance I need to replace for one of my Gapco windows (47 inches width X 26 inches height). I did not take out the window to get the part number of the broken channel balance. Hopefully, the below info might be enough to identify the part number. 1) D ... (cont.)

Good morning, I'm looking for window balances for 6 windows. A window panel measures 26-1/2 inches tall by 25-5/8 inches wide. The balances have a model code 2530 and cap to cap length of 27 inches. I truly appreciate your help with this matter.

I'm looking to replace some broken tilt latches on a 7880 series 78 SH Tilt windows and don't know the correct part # to order. Any help would be appreciated

No marking rollers and housing look to be nylon or plastic Windows are metal and oak wood

I have 2 windows that need balance replacements. Single Hung. Markings: 2630 Metal is 26-3/4" L, with plastic ends 28" L

Hello! I am looking for assistance on identifying the channel balances. Attached are photos. The overall length is 33". The width of the balance shoe is 1 1/8" The identification is different between the two. Not sure why. One side is 32 4 ER Caldwell. The other side is 32 9 KQ Caldwell. Thank y ... (cont.)

I have a set of double hung tilt windows with this brake mechanism. I haven't been able to figure out how to remove the balances, there isn't an obvious screw or release lever at the top. The windows are double glazed Duralite if that helps. I'm in San Francisco, also in case that is helpful. Thanks ... (cont.)