Viewing all customer Discussions for:

Other

Need to replace bottom weather stripping from jelly wen window. Number on window etched into glass is g402-01184-8703.

So I think I need your part 84-024. This is a lose part that goes with it. Sets the height of the roller in relation to the track. Do you offer this part as well?

How do I repair this part? Any suggestions or recommendations? It bent and splintered broke off as people when stepping into home have stepped on it.

Not which the right one is please help. Window not at location

Hello, our house was built in 1963. The storm windows on all 6! doors slide up and down. The white plastic pieces in the corner are breaking off of the top storm windows. The window stamps state: Guardian, Charleston, Mich. ANSI Z97-1-1984, Safety Tempered SGCC 933 I/8U, then a line and 16 CFR 120 ... (cont.)

I am looking for .. - (1) escutcheon plate (black) .. I just learned a new word ;) - (1) turn lever tail (black) Please advise if these two parts can be ordered separately from a complete set. Thanks .. Georges

Looking to buy 1 hinge. Please let me know the availability.

Hi, I am looking to buy replacement part for window wheel rollers and attached are the pictures for the width and height of the existing window wheel roller. Can you see if you have compactible parts? I would need 20 pieces. I also looking for the white fabric that goes between the two window p ... (cont.)

We are new owners and do not know who made our windows. If you do - I would like to know. Many of the rollers on the bottom of the sliding windows are stuck and worn down to "sleds." I'll dig around on your site and see what I can find. Right now I need to keep the screens from blowing out of th ... (cont.)

We have an old 1950s Era trimline sliding patio door assembly with broken wheels. Do you have any idea what part number would work to replace this piece (pictured above)? It is a 1 inch wheel that is 1/4 inch wide. Whe spring is about 1 inch long. The wire frame that holds the spring is approximatel ... (cont.)

Metal peice from bottom of window that slides into channel balance. No photo available and don't know what type of window other than contractor type.

Hi, I have a part that has broken on a number of double hung sash windows. This part catches the balance on sides of window opening and when broken, the sash falls. Can you please identify this part and provide a cost to order replacements? Thank you, Darryl

Rebuilding this set of bi-fold doors and need to ensure I have the correct parts. A Home Depot employee assisted in listing some if not all of the parts needed for the project however also wanted to check whether one of the bifold door kits would work.

Hello! I need: 4 black snap-on caps 1 handle with adaptor to screw onto operator with pin as shown in "handle pic. jpeg" 4 pins to join handles to operators. Thank you for your help!

Hello, I need a replacement operator. The current one is a truth 45251 split arm operator. I can't find anything the same lengths.

Do you sell this part? Thanks

Guardian sliding patio doors, do you know which size pile I would need

This part seems to be very similar to your part 26-148 except the dimensions are slightly longer and this part does not seem to have the metal wire underneath. I would like 6. Can this be special ordered? Diane

I need to know how to find these rollers so I can buy new ones

Double hung window36X48 r.o.Also need two thumb tilt latches left and rightTwo constant coil balances one left one right