Viewing all customer Discussions for:

Other

Need help with awning window crank operator product code: 39-025. I replaced window crank operator but it won't open all the way need help thanks.

Channel length 19.5, Stamp appears to be 19 2. Certainteed window brand. Only need one balance for now. If it works out I'll order them for the rest of the windows.

Hi, Im trying to source replacements for the attached latches. Made by Fleetwood in the mid 80s. It's not clear to me if the issue is with the latches or the internal locking mechanism. So assume best to replace both if possible. Thanks

Need a new whole piece

I am looking for a 1/4-20 threaded plug with a flat head.

Looking for a balancer for an Atrium Double Hung Window, installed around 2005. The sash is 23x47 and the balancer is 20" long. I have attached 3 pictures of it - the bottom, middle and top. The balancer has 19D stamped on it. Please let me know what I should order. Thank you

My Blum hinge is bent and need to replace it. 110 degrees. Part numbers are34.355-01.0. And 213.21,, 5/16

Hi, This part is proving difficult to find. Do you recognize it or can you offer a replacement part that will work? Thanks

Channel is 1/2" wide and metal length is 19 5/8". Stamp is 19 5 (see picture). Do not know window manufacturer. Would like to refresh two windows, so need four balancers.

This is a sliding glass door that was installed 10 years ago. The locking key female end broke apart inside. I need a replacement. Please see following pictures.

I am sure you'll help me to find it...

Good afternoon, can I purchase a window balance S765-22 with the wire attachment like the one in the photograph.

I have a Sears storm door (see photo) and need to replace the Emtek 322 lockset and handle. (see attached photos). it appears that your product 40-183 (see attached) is the right fit. Can you confirm and give me any advice? thanks David

I'm looking for replacement parts for Buchmin Sliding Mirrored closet doors. I need the track, channel, and a replacement roller? Here are some photos of the top track, bottom track, and the rollers. The first roller in the photo is missing a plastic cover. The doors themselves are 37 inches by 94 i ... (cont.)

I am looking for replacement drawer slide for the provided photo item. Also, individual rollers, if possible.

I need two of the roller assemblies for my Pella Series 10 Sliding Patio Door. I also need (ONE) of the track assemblies that the rollers assemblies roll on.The exact measurements on the assemblies are: Housing Thickness(width) 5/8" Housing Length 3 and 1/16" Housing Height

Need replacement rollers for guardian sliding glass door A1,TTIWED4891-1.792ISNA DERE9METYTEFAU8/10202CCG2

I purchased coil housing pivots 15-087, Jan 2022 at the time I didn't realize I needed the coils as well, I am finally ready to use them, the windows were purchased in 2010 from Home Depot, the tag reads; 23 3/4x57 1/4, 8501-2, 19982288*2*2*1.1 1, 19 15/16x 28 5.16, 08/18 SS LowE 3 Argon. they are v ... (cont.)

This is from our older Hurd bay window that's the left hand hardware and I need the hardware for the right hand casement. The casement sash is 24x58

I am trying to fix my casement window. The part I need is this short linkage that connects the window to the hinge. It has rusted out over the last thirty years. Can you help me ? - thanks, John