Viewing all customer Discussions for:

Other

Need to identify part for replacement of window latch

I have 3 of these old sliding glass patio doors (circa 1976) that the handles or more specifically the lock mechanism is broken and or missing. They are mounted on the glass side and the screws are apx 3.5" apart and screwed thru from the front (strike side) of the frame, see photos. A clamp or fram ... (cont.)

Looking for this part

Looking to replace this. Can you identify and do you carry?

I am looking to purchase 4-complete sets of Patio door hardware as well as 4- of the multi-point mortise latch. The tag on the door reads as follows #5800 Series door original date 2/19 Silverline PO# 1586SC210 I have 48 plus units with these Patio Doors and they are starting to go bad. ... (cont.)

-Hello,I had installed Quality cabinetry in my carpenter's personal kitchen fifteen years ago, and some of these clips are coming apart, and/or falling apart. we had a few of the right side drawer clips shown, but none for the left side underneath the box. please let me know if you or someone has ... (cont.)

problems getting window to stay in, I think the shoe is different. I will attach pictures maybe you can help me. the new one broke trying to get it in and you can still see the old one.

It's an Alcon part that covers where the window crank would go.

I am trying to replace vinyl window glazing on a Krest Mark Series 100 window. The picture shows how the glazing looks on the window and what the end of it looks like.Please let if you have avaiable.Thanks Brad

Is the door strike plate included? I will need need one. My trim plate has mounted posts on it for machine screws thru inside trim plate. Your trim plates mount with wood screws but my door has 1/4" holes where your screws go. Also your strike plate does not have the 90 degree roll. Please advi ... (cont.)

I am looking for the pins that screw in at the top of the screens and can't find them. I attached a picture of the pin I took off on one of the screens as an example of what I need.

I'm looking for the hing hardware and how to replace operating arm seems to work ok

Hello, just wondering if you can advise on how to replace. Thank you.

I have these old block and tackle balances in my windows (circa 2001) and some of them have failed. Mostly, the shoe has failed - it's jammed and in some cases damaged. It's an unusual shape of shoe, not a t-shape but rather a single sided sort of cam shape, as shown in the photos. This one is undam ... (cont.)

across front 5/8 top to bottom of front 7/8 length 2 1/8 single roller looks like roller measures about 1 1/8 but really worn out. room build in 2000 by patio enclosure out of Houston Texas

I am reaching out on behalf of my client. They need to replace the springs in one of their Peachtree windows. The window isn?t opening/closing properly. I cannot find a CT based vendor that carries this product.

Pin at bottom of multi point lock broken off or missing Jeld-Wen window alum clad wood need new he'd.can you help

I just received the correct b&t balance, thank you but discovered a broken top ash guide. It is 1 1/2" long, 9/16 deep, & 5/8" wide. I didn't find an exact match in your site but if it can be special ordered or a top sash that will work if possible. Thank you for the help

Attached are pictures of my window balancer. I need help trying to identify them.

arm # is 20755 on each see pictures of latches how does one attach the latch for the window - some of our window latches do the following - open the latch it locks the window and when the lever is closed it opens the window - eas it put in wrong (obviously) - how do you correct this problem - are l ... (cont.)