Viewing all customer Discussions for:

Other

Hi, My sunroom is older and aluminum. Several of the window sills are breaking and the glass if falling out the bottom. I haven't been able to locate this part locally or online, probably due to the fact that it's an older part. When searching online, I found similar parts under several names, inclu ... (cont.)

window by rich horizon sun smart parts p-x6

Peach Tree screen door about 20 years old. Need 4 new rollers

Hi, I need the sliding door screen. Do you have it? This is a 9ft ceiling house. Thanks.

Need 3 window cranks

There are no numbers or stamps on the old balancer. They are 18 inches long. Can you tell me what balancer we need? I need 8 of them

Need help with glass replacement windows are 20 years old Seals are broken. Who do I contact

Good morning, My windows are Oldach brand, approximately 24 years old, and I need replacement tilt latches. I have attached a picture of what I am looking for. I also need the associated hardware, such as the clip and springs. Thank you, Rich.

Window balanced

Hi there im looking for fake vinyl mutins 1/8 thick 3/4 wide. That i can glue to the glass

For Jeld-Wen casement windows. Width is 9/16".

Door handle and internal parts for a CGI Series 7700 hurricane resistant single door. The invoice identifies the lock mechanism as a series 800 Lever. CGI does not accept direct to customer inquires and the dealer who installed these doors in 2018 is no longer in business.

These windows are vinyl replacement windows not really sure there are no markings on my parts that I removed. Thank you for all your help.

Dimensions: 1" x 1/2" Color: Terratone

Window tilts inward for cleaning, accidentally let go and the left side plastic piece snapped.

A nderson Window, dated 3-90 and has CIG-2 on the bottom right corner of each window section

I need to replace the screen door locking mechanism on my Pella door. The door number on the inside hinge is 100405 91006 9001.I think the part number is 305013 Dark brown, but I'm not sure that is correct. Any help? Thanks, Ken

Hi there, I've enclosed photos of the ends, as I would imagine they are critical. The unit is stamped with "27 C" and I measure the length at 28 inches (metal only- not including plastic ends), and the width appears to be closest to 5/8 inch. Could you guide me to a compatible type of balance? Than ... (cont.)

Hi! I'm in the process of buying a home, and I noticed that a couple of the casement windows had cranks missing. In searching the internet, I came across your website. I could not find an identifying brand on the windows, but I did see the above markings etched on the glass. Hopefully, that is s ... (cont.)

These are the springs which work well. I am trying to identify what they lock into on the bottom pane. The window balance?Looks like a plastic piece the spring latches onto..couldn't get close to get a picture. I could remove the window if neededPaul