Viewing all customer Discussions for:

Other

I am looking for the two sets of pulls that go into an aluminum (wood grain one side) sliding screen for Pella sliding doors and two lock cylinders for the sliders also.

Cranck broken window does not close.

Hi, we're looking for a replacement part(s) for an awning window.The knob/screw mechanism is stripped on the knob and probably the interior of the holding mechanism.The knob and interior mechanism are shown in the lower portion of the attached photo.The mechanism is 5" wide.The exterior opening mech ... (cont.)

Patio Sliding Handle Set with Keyed Lock 6-5/8 - Part 82-002K Can I get this with a handle?? I appreciate your reply Thank You Todd

I have 4 of these sliders in my house, and live in an HOA with 200 homes, each of which have 4 sliders. This one has completely failed, so I'm desperate to find a replacement. One other door is "loose", so I expect to fail soon. They are now 50 years old. If you can source this latch, I need 1 A ... (cont.)

"Pella multi point lock system to use with Pella select door handle"

Hi I have an old Pella patio door with a screen. The Roller Rod (I think that's what it's called) broke on one side. The rod is attached to a spring that helps the screeen door return to the closed position. It seems to be an older model door and I called Pella and they told me the part is discontin ... (cont.)

From what my customer is saying it's a bypass door. Don't know if they know exactly. Let me know what you think. ThanksDaniel

We have a Superior Lock Set. The handle on the door we open has lost its spring action. Do you have the part to fix it?Lee

Hello, I am looking to replace the latch track on several atorm windows (pictures attached). Do you carry this part? Thanks, Adam

Eagle Maximizer Plus 03/2006. NFRC 099-014/022/045/046/047/063/064 I need the nailing fins for (3) of these windows. 3'x5'

The top plastic piece is broke on one side and the other side doesn't look long for this world either. Thanks so much, Steve

Spring assembly for non tilt aluminum window from 1965 building

I recently purchased 26-420 and 26-419 tilt latches for my windows. Everything size wise fits except for the clip that holds it in the window. It is shown as 3/8" in the attached picture. Do you have this same latch but with the clip at 1/8" or 3/16"? Thank you!

I am looking for a pivot bar for my window. The number on the bar is R-1588-2.

4 of the pix shows the coil spring, I think it's broken. Can I get just the coil spring only, and which one. The other pix shows the bottom of the spiral spring, the cylinder is 3/8" x27" long, that sash is about 5 lbs.

My dad custom built these mirrored bifold closet doors in the early-mid 80s. I thought I repaired them but if I'm being honest, it was probably a temporary fix. It seems like the tracks (bottom/top) themselves are probably fine. However, I could see a new bumper-- at least on the bottom track and d ... (cont.)

bar is 7/16 wide at the widest end, 5/16 the rest of body, 3/16 thick.

Hi Team, We have a broken tension boot part that I was hoping you could identify and advise regarding a replacement. The window is a double-hung vinyl replacement window that is about 15 years old. I do not know the manufacturer. I attached 2 pictures...1 of the broken metal "U" shaped boot piece a ... (cont.)

I need to install drip edge on the outside bottom of all doors made by Loewen doors. Do you carry Drip Edge? Thanks, Jaiswal