Viewing all customer Discussions for:

Other

I recently purchased Item #S385-27 (10 window balancers) for a number of Sash windows all the same size installed in KB Homes Development around 2002. The problem is the balancers are not staying in-place as the plastic stopper held in place by a single screw are broken on the sash so lowering the ... (cont.)

Need new lock for sliding door. Please send part numbers and price.Inside latch L 12.5"W 1"Inside L 11"Inside W 3/4"Top screw hole 1/4"Top inside screw 1 1/4"Top inside second screw 3.5"Top bottom inside screw 7.5"Bottom inside screw 10"Bottom latch screw 12"Door handle holesTop 2.5"Middle door han ... (cont.)

This part is from the 3150 Series American Graftsman window. This part helps guide the window to the corner .

Need replacement knife clips for window screens

Do you have this gasket? For Pella Architect Awning window, bottom gasket. Thanks, Later, Paul

I have a pair of Pella casement windows and need the plastic cover for the movement on the Right side. Attached are photos of the part I have (Left Hand) and the original color. If you have a Right-Hand piece in the same color, I would take it. If you have a Left & Right in matching colors, I would ... (cont.)

I'm looking for 3 inch trim tap, with two beads 1 inch apart, and 1 inch with 1 bead. I would like them in brown. I was told to get part #55-306 My name is Doug I'm the maintance man for Lowell United Methodist Church I have 4 windows that are leaking now. Also could I get a catalog from you. Thank ... (cont.)

looking for this part, please

Hello, The latch mechanism on my Milgard window no longer works; the window cannot be opened. The window was manufactured on May 27, 1999. I have tried to use the Milgard website to find a replacement part but it requires that I input a model number which I don't have. Attached is the sticker from ... (cont.)

I need to replace the pair of balancers on the vinyl window pictured. The lower window sash window is a double pane 38" high by 29" wide. The balancer is 1 1/4" wide and the travel distance is about 34". Do have anything to replace the right and left side? It is a double coil balancer on each side ... (cont.)

Pella door mortise for multipoint lock

There are no markings on either roller. I believe that the plastic one is the Peachtree roller 84-028. I am not sure of the metal roller. Do you have any idea. One was on one bottom side and one was on the other bottom side.

I saw 5 232 208 and 5 365 638 on top. I also saw 35" somewhere. What part should I buy? Just coil or whole quick tilt? It is for 19x38 std windows. I need both left and right. Thanks.

What part goes with the question mark? Another guide for up and down stability? Also the white slide guides? what part number is that? Building built in 1965

hi i lost a window latch/lock. looks like rusco window lock on your list can work for this case (see pictures). i don't have the original screw for the lock. do you sell the screw or know where can i get it? i searched your website but it didn't come up thank you so much for your help Mary ... (cont.)

Looking for guidance on the correct balance replacement for the type I have in the pictures. I believe I need a S770 28E but my hanger type is a bit different. The picture shows a 28E and a 28F. These came from identical sashes. My sash weights 28.6lbs. Any assistance is appreciated. ... (cont.)

Hello, hoping you can identify this coil balancer

Hello, hoping you can identify this slide bolt

Please let me know the reference that I need to order to match the piece that is in the attached. I though the parts 39-171 and 39-172 will be good, but they are 1/2 inch bigger from the center. Could you please help me on this matter, and also which handle I need to order that fits. ... (cont.)

My sliding doors do not lock. I believe this long rod is what is supposed to be locking into place. Unfortunately, it doesn't lock into anything. I'm curious if we are able to replace it.