Viewing all customer Discussions for:

Other

Kitchen cabinet drawer slide "Front Fixing Bracket" Part # 793.025 (.10.01) is printed on the device. From house built in 2005 Screws affix at an angle (appx 70 degreesd?) from the top of the device into the rear underside of the front of the drawer box. There is a green slide on the face of t ... (cont.)

I am looking for replacements for these Scheirich #PPW 093 brackets. Do you have any suggestions?

Please help me with the replacement of channel balance and top sash guide for Kinco double-hung window.The metal part of balance is 30"The 2 windows weigh 35 eachI would like a price to replace the balance and sashes

cant seem to locate these anywhere.

what seal do i need part number want both

Bottom edge seal. T strip looks to be about .187 Not seeing any one your site with the 90degree angle and the t slot on the correct side. Thanks for any help

The channel width is 1/2". There is a stamp 28D.

I have attached photos of 1. Door Inside, 2. Door edge, 3. Door outside, 4. Strike plate.Dimensions:1-8 5/8" x 1 5/8". 2 screws Inside2-10 7/8" x 5/8". 6 screws// 2 pieces, split at latch opening (latch broken) Door edge3-same as #1. No screws outside 4-8 1/2" x 2" . 3 screws strike plateThe bras ... (cont.)

Gear is skipping

The latching mechanism has a part number 45CL-02. No part number on the outside handle portion. Notice the locking ketch is in the up position not the down position like your part item number 82-008 which I ordered earlier and doesn't work due to ketch lock is in the downward position. I also need t ... (cont.)

I'm looking for the replacement part numbers to replace the pile weather strips on my sdg-r20 sliding glass door. I'm replacing all of them. Thanks

Looking for matching touch up paint. Hardware is Truth

Are you able to supply the crank handles for these windows? The existing's have stripped out and are no longer operable?

I need to replace these as the accumulation of pain makes closing and opening my casement windows very difficult. Please let me know the price, name of item, and how long to receive it. I will need about 2 dozen.

Balance photos are attached showing the metal sleeve is 24 inches long and the metal failure is in the "jaw" piece section. The failed metal piece section is 3 ½ inches long. Also, window is 23.2 lbs.

I have 3 champion casement 8200 series windows. I need 3 RT and 3 LFT cranks and covers. Thanks Harrold

Hello,I need this door handle and rollers for door.Thank you.

I am unsure of the part I need. Herebare some pictures. Its 31" long with winged ends. Adding some pics

Hello, hoping you can identify this glass stop.

The 3rd photo is the actual part I am looking for. It is removable separate from the corner key. The shaft that slides into the window frame measures 3/16" x 3/16" and is 1 1/4" long.