Viewing all customer Discussions for:

Other

Door has full length hardware locks.

I don't have pictures of this window balance while it was installed The metal part is 29" long. It is stamped 2820G on one side. No other identifying marks. The shoe measured exactly 1" per the guide picture. But it was slightly different than your pictures, and I suspect it has been worn down. I ma ... (cont.)

7/16 glazing vinyl

Need a genuine replacement crank for 1997 andersen window. Looking from the inside the split hinge is on the Right. Attached photo of crank assembly

Hi I tried finding a window brand or part number with no luck. I got four pictures showing the profile and measurements.

markings on window GMAC CC CBA HK3 CIG4 THE SIZES OF SCREENS ARE APPRX 20 3/4 X 56 THEY ARE CRANK OUT WINDOWS , 2 PER WINDOW, THE WINDOW SIZE IS 4' X 5', I HAVE 2 WINDOWS, SO NEED 4 SCREENS

hello, needing some help identifying this part.

I have a broken LEFT Single Arm Roto-gear Operator for Marvin Window Frech Casement window. See photo. Marvin no longer makes the part but tells me it is Marvin LH part no is 10814810. Do you have such a part? regards, B. Bates

Looking for weather strips for windows

I need to find a replacement part for two window balances. The original items are probably from when my house was built in 1993. It appears that the window sits on the white nylon(?) bottom pieces of the window balance and uses friction to hold the window in place when it is opened. Window Fram ... (cont.)

I need a Jeld Wen , "Wen Lock" replacement kit

Hello, Can you please help to identify manufacturer of windows. It may be Great Lakes? The information on the windows are included.Appreciate your help. Thanks! Arlene

I need new corner keys for my 2011 screen frames, there is no sticker identifying the make of the window. As you can see the overlap has broken off of the ones in the pics. So I got the 95-205 they fit fine however the square itself not counting the overlap is bigger on my window keys by an 1/8 inch ... (cont.)

1/2 inch 32 inches long Chanel just need to order the right one. Thanks

Hello, This email is to start a new discussion. We are looking to replace the rollers on our four Vista (steel frame) sliding doors. Our house is in Los Angeles, California and was built in 1948. These sliders are most likely from that same period. At the top of the glass sliding doors is the ... (cont.)

I'm trying to determine which replacement part to purchase. Attached is a photo of the stamp on the channel balance. It looks to me like it says "24 3 BO CALDWELL" Thanks for any help you can provide! Karen

Metal Channel measures 26 5/8" in length. The stamp says 26 2. They are Jeldwen windows. I will need a total of 4 balances. Thank you!

Looks like the piece the holds the rod in place is missing.

Hello, I ordered a replacement door hanger from Swisco part # 23-047. It was 2 in across with a 1/2 inch offset .It fit the old part exactly but when I put it up the roller (wheel ) was too large. This door is heavy. The home is about 15 years old located in Crystal Lake, Illinois. Any sugges ... (cont.)

Looking for replacement set for sliding screen door