Viewing all customer Discussions for:

Other

Hi need a replacement milgard door latch. The one I've tried ordering is offset differently and won't fit the door handle unfortunately. The shaft is totally fine just the handle is offset differently. Do you have something like the two photos I sent? Thanks

Hello, This balance is from a Pella vinyl window model 150. The markings on the coil top row is #6.5 35" 145B Z Date is on the second row of 01/11/17 Top clear plastic piece that held coil in place broke. I'd like part numbers to replace the entire assembly if possible because the shoe lock is ... (cont.)

27 inch channel length. 26.5 JR CALDWELL written on the side of channel. 4 balancers required total.

AMSCO VINYL WINDOW

channel length is 27in stamp: 26-4 FE5 CMC 45 Milgard window Need to replace right side in 1 window but may need 2 if can't mix with an old balance. I was wondering if one of your standard would work for my set-up

I need to replace the channel Balance for my windows Measurements are; 21 1/8 122 JAPAN (SHOWS)

Need two of these. I have the shoe and looks ok but not sure if I can reuse? I am on a tight timeline as I am selling the house please advise if you can supply this part.

I have an older home with season all windows. The bottom sash glass is broke and one of the top latchs is busted. I'm wanting to price a new window sash. It's a rental house so I haven't cleaned the window yet Sorry for the dirtiness in the picture. I'll have to get the measurements for you but is ... (cont.)

I am looking for two bottom balancers, beige the engrave lettering reads: 28DS 38CP

Hi Team - I would like to order one of the attached pieces for an older Viking window (Single moving window) The spring fell out of the piece in the picture. It's 28" long end to end. Thank you! BTW - I started this process a while back but didn't complete it. My fault. Not sure if you have any re ... (cont.)

Please help me identify this roller. 1" nylon concave roller.

Hi. Could you please help me identify which SASH balancer I need to buy to replace these two balances. I was unable to determine the shoe size, I narrowed it down to either S380 or S385. I havea: 25 4 DX CMC 11 and 25 3 DX CMC 7 Both measure 26 inch in length of metal channel, ½ inch width ... (cont.)

Unsure if these are swisco parts but they looks similar.

I need a replacement for a bypass door roller patent number 3041657. Is this considered a half inch offset?

Looking for a similar sliding door handle/lock

I would like to replace 2 of the ones in the photos.

Hello,Please see the attached photos of an existing sliding glass door roller. The pics have the dimensions included. I need two of these rollers. Let me know if you have any questions. Thanks!Kiel

The windows are plygems 1500 series single hung window. The house was built and the certificate of occupancy was issued in January of 2019. Myself and my neighbors have several broken (stripped)ones already.

The tip of my Skylight pole is worn. The pole is Anderson. The tip is six sided the shaft of the tip is eight sided. The groved shaft of the window mechanism is approximately 3/8 inch. Are new tips available? Can I change out the tip or pole and receptacle to a new model? Perhaps a hook and loop? T ... (cont.)

Do you have a replacement or suggestions?