Viewing all customer Discussions for:

Other

Hi, I removed this coil balance from one side of my double-hung vinyl window. Both coils have broken. The cover shows CertainTeed. The window size is 32 1/2 x 25 1/2 inches double pane. Do you have the replacement part? Thanks Ron O

I cannot get the screw to go into the slider and latching piece. Also the screw to secure the handle to the screen frame. Thanks Ernie

I can't seem to find which window lock model these are. I can't find a serial number on the lock or window. Have tried a few replacments off amazon but nothing has fit. I'd rather replace the locks then get whole new windows. I would need about 20 of these locks

needto replace them i could not find model #

I need the part that snaps in where the frame meet the glass. It's kinda like a triangle

Hello, I need to replace three Roto crank units with serial # 0P052020. Can some tell me what parts I need to purchase?

Need to replace these.

arm crank andersen window

I purchased a 1950 brick home a year ago that is in exhalant condition that has oak wood windows in the brick breezeway that are in very good condition except for needing re-glazed. I will be removing the windows to make re-glazing them easier and a better job. They are non-tilt and have spiral bala ... (cont.)

Lost one of these. It slides into the hinge track on a Marvin Casement. Any ideas on a replacement?

Hi My wheel came off my door but as you could see one of the photos it looks like the part that it attaches to, snapped and is in the latch

Mercer Ind. 89 - 1 is engraved in the metal frame. House was built in 1989. These are the original windows.

Hi! I just replaced the balances I got from you guys but it looks like another issue I have is the upper piece inside the window track that grabs hold of those balances. It broke off so my window can't catch the balance. What part do I need to replace this? It's from an Alenco window. ... (cont.)

Help ! My windows won't slide

Part stamped with number 1056 about 29 1/4 inch long

Hi, We have two single hung non tilt Milgard windows that have broken channel balances. The larger window balances say 26 5 BSI. The smaller window balances say 26 4 BSI. I can't find the correct replacements, if you can please help. Pictures attached. We are selling our home next week and need to r ... (cont.)

I want to replace my window sash, length 28 in part#2740, and the take-out clip to go with it. Pictures attached. Thank you for your help

I am in need of replacement hardware for my casement window. Both the crank mechanism and the round toothed parts are worn. Please advise as to what part is available. The mechanism that houses the crank is approximately 5 inches wide.

Need to replace these drawer slides on three pencil drawers (3 pair slides)They are stamped "Hardware Designers" which I have researched and found to be a company in CT that is apparently no longer in business. Slides are 18", side mounted to the drawer boxes with tabs for undermounting to the desk ... (cont.)

Hi I'm looking to replace the left and right arm operator and not which one will actually work . Would you be able to identify which arms I need for the left and right? I was looking at the Product Code: 39-032 and unsure if this is the exact one for my windows. I have attached the pictures. Please ... (cont.)