Viewing all customer Discussions for:

Other

length looks to be 2 15/16 width 1 1/4 hole center to center 1 7/8"

Custom window balance with rollers on bottom. The channel is 11 1/2 inches long metal only please give me a price and availability as soon as possible. Thank you.

channel is 20", stamped 19-4. Milgard window and 2 are needed. These are for my daughters window and the pictures I took was before I visited your website so hopefully these will be enough. If the are not I can go back and get more. My only concern is that it looks as if the "top fitting" is differe ... (cont.)

the part is 32-076 but it has rollar in the middle

Hello, I am looking for both left and right window cranks for a Home Depot American craftsman casement window. A= arm to window is about 5.25 inchesB= about 3.25 inchesAnd the outer phillips head screws are about 4.25 inchesI can not find any in your pictures with the screw holes that widePlease adv ... (cont.)

1st one: marking 2560. Measures about 27 inches. 5/8 width 2nd one: marking 2040. Measures about 21 inches. 5/8 width Need replacements. Thank you

Please help identify replacement based on attached photos

Overall length 28"

2 1/8" long 3/4" wide 3/8" - 1/2" Thick

I need to purchase Four rollers and related parts for a older Pella door. Can you determine this by the serial Number IGCC IGMA CIG-2 F 0811.The rollers on it now are the "Flanged Type"Rich

I have a 3/8x 29" spiral tilt window but can not make out the color. The sash weight just under 18lbs. Which color co I need to order?

I believe the dimensions of 40-198 work but the dead bolt is significantly different.

I believe this balance is obsolete and hoping there is an alternative. Thanks in advance for your help.

1717r inside part

I need multiple rollers for these pacific industries sliders. I'd like to get rollers that will fit in the center of the larger slider for support to stop the sagging. Also need single hung rebuild kits for some windows. Please contact me as soon as you can thanks

Weather stripping for casement windows. Sent 2 pictures of the profile and dimensions of the weather stripping.1 picture of the casement window with the weather stripping in place. The insert groove is a .080" depth and .334" width. The weather stripping is a rigid vinyl plastic. Which products woul ... (cont.)

Handle with up-down sliding lock mechanism.

The part is 17" long. Angle up in back to screw ow. That's what broke off

I am looking for the attached parts

Took a picture of what I could find of the broken parts. The sash balances have 36ds 49L stamped on them and the cam pivots are about 1 13/16 high 1/2 wide and 13/16 deep. Hopefully you can help me find the proper replacements, I would appreciate any help!