Viewing all customer Discussions for:

Other

We have several indoor bedroom closet doors that have broken wheels I need to replace them These are from 1997

This is the cabinet side of the 2 part 270 deg Mepla hinge

I have 9 double hung windows measuring at 27 1/2 x 21 1/2. Looking for bottom rubber seal and side felt seals. Appreciate the help, thanks. These windows are mastic windows as well. From around 2005. Have couple more pics. Looks like 1/2 inch from bottom of seal. Seal looks flat though not roun ... (cont.)

Rotten wood on portions of the sash. Is there a replacement milled part?

I need 6 soft close dampers. Photo attached. Gray damper part is about 3.25 inches in length.

1991 double hung window. bottom mount square bar two screws. one screw on sloped surface. looks similar to anderson sash pivot

Hello, This particular window doesn't lock like my other swing windows do. It only cranks closed. The part that attaches to the window frame for the hook to tighten is not there. One photo shows where it should be and that one has never been installed there either. My question is this lock broken or ... (cont.)

Hello. On 2/18 I purchased from you (8) Legacy Handlesets (Item 82-089) in black to replace what I thought was the same handlesets i have in brass on Loewen sliders. As you can see from the photo, they are almost exactly the same but sadly the placement of the locking pin does NOT align. Can you hel ... (cont.)

I have been trying to locate this specific piece of weatherstripping and have had no luck. I am sure hoping your able to assist. Thanks in advance, Ed

I have a broken pivot bar in an approximately 2006 simonton double hung window (hurricane glass) for Tampa Florida. The installer is no longer in business. Do you have a suggestion for what type of pivot bar to purchase?

Dear Swisco, I need to replace both balances on a plastic frame double pane glass window that weighs 13 lbs. The window frame measure 33" wide and 22&12" high The metal part of the balances are 19 & 1/2" long by & 1/2" wide and and 5/8" deep. Marking on the left balance(looking out) is 1 ... (cont.)

I have attached pictures of a pair of window balance I need to replace. Please help me with identifying and purchasing new ones. U shape is 5/8 x 9/16 x 5/8 and 28" long. Sash weight is 19 lbs. There are no markings on balances. House was built 2002 Melbourne Beach FL

This is off of a Hibriten china hutch. It is the pull for the doors. The number on the back of the pull is BS80776

A client asked me to locate new rollers for PGT sliding glass door screen panels. Sending pictures of door edges with info and pic of a mutilated roller removed from screen. ANY information is greatly appreciated!

anyway reference code 36-048 where 1 of parts is 10inces long mine is 10.5 long . another 1 where it says yours 7 .5/8 mine is 6.3/8 or 6 .5 my says hg04-2000. also u send picture of code 39-172. where yours says 5 inches my is only 4 inches .also yours 3 1/8 mine 2 and half . in between screws y ... (cont.)

The Corner Locking Pivot Shoe was the recommended replacement for my tilt window. After doing a cut out, I was able to correctly install the shoe and attach it to the channel. It worked great. On the other side of the window, this shoe would not fit even with a wider cut out area. I wedged it in, ... (cont.)

Need help

Some of these are branded Andersen / some are a 3rd party unbranded. Looking to replace for both the handle & cover for accomodation of window blinds. Thank you!

My under mount pullout slides are slamming closed and I'm looking to replace them with same slides. Any help would be appreciated. Thank you,Ron

Hi, this is an Andersen sliding door thumb latch lock receiver. I'm looking for this exact part not the lock itself. I believe there's a picture of the same part on this post above. Thank you Sam