Viewing all customer Discussions for:

Other

Please see attached pictures - I need the Brass Component that latches on to the frame to lock the door closed...David

Old aluminum sliding glass door can't find rollers. Can you help?

I am looking for about 10' of a bottom track for heavy closet doors. The track is about 3" wide and the rivets are about 1.75" apart from each other

Looking for a replacement or something similar with same spacing so we don't have to drill new holes.

Does your 32-146 have the two locating pins on the back like in this photo? Thanks!

I have a sliding screen door part B-X1184. The sweep/bug stop has come off. We would like a replacement part can you please advise. Thank you

Could you please identify this drawer socket for a replacement? I did not see an identical match in the picture gallery. The one shown in the pictures is not broken. Thank you

Hello - In 1988 new Quaker Made kitchen cabinets were installed in our home. They have lasted very well but the high use hinges have been wearing and breaking. As you can see from the close-up photo they appear to be Mepla (?). I have already replaced several hinges myself with spares from the or ... (cont.)

I recently bought a 10-061 shower door replacement from your website. I'm now looking for the part that connects it to my sliding door. Picture 1 is the part with two screws and is black, picture 2 is the roller piece I purchased that it'll connect with.

Do you need any additional Info? do I need measurements of anything? Windo size arm length???

Post is located at the base of a tilt-in window. It pivots in a movable track to allow the window to tilt in. Window manufacturer unknown. Thanks for any assistance.

Stamp 28201 BSI. Length 29 inches

I could not find this pivot in the catalog. All the one i saw were flat on the face.

Looking for a replacement sliding door latch for an AW slider. See pics for what it looks like. Any help will be greatly appreciated.

Hi just curious about replacents

Looking for these hinges to replace broken ones in my kitchen. They have nothing but Japan 2 on it. I would appreciate if you can help me.

It is a solid heavy door, hung in 1968. Hardware is heavy duty. The wheel appears to be 7/8". CaN you replace the wheels only?

Do you have this PGT window latch?

I took pictures of the weather stripping from all sides hope that helps.The stripping is made of aluminum with spring clips on the back screws hold it on. The brush needs to be longer to seal against the other door I think.again thank you for your time.

Letter F on back of hinge.