Viewing all customer Discussions for:

Other

Hello- I am looking for new patio door rollers where the measurements are Width ? .75 in. Height 1.1 in Wheel diameter. 1.25 in As you can probably tell from the attached photos, the wheels are metal. Please let me know whether you have replacements for these rollers. Thank you

Can you please identify this part? We need two 16" and two 22". They came off a Window Master aluminum single hung non tilting window. Thank you,Eric

I haven't tried removing it since it is winter. Let me know if it is necessary to find a suitable replacement. Thank you for your time. Best, Kabir

?

Pivot shoe broke and needs to be replaced. I cannot find a brand name anywhere, glass or frame. Bought home new but 17 years ago. Probably came from Home Depot or Lowes. That's all the help I can offer. Thanks.

Need help with this part. Part is stamped with 28F. Heart is 29 inches long. width is 9/16 trade it considered as half inch.

Slider will not latch. Handle on each side ok but lock workings not.

The grid in the pictures is 1/4 inch. The sliding glass doors should be 1963 era. I need parts for two sets of sliding doors. I'd also like to get extras!

Need assistance to order a pair of 34" Channel Balance hardware. Stamp on defective and/or old part is 3390 B.S.I. 38. Keith

Center of screw is 6 and 5/8 by .75 wide jamb is .o5 overall its 7.25

Please provide us with a price to replace the door handles and locking mechanism. We would like to re-use the holes that are already in the door.

The photo is for an internal tilt latch on existing windows with a scale under it for scale. Above the tilt latch is the actuator that was purchased from you site that works with it. I need several of the internal tilt latches for some window repair can you find one that will match? ... (cont.)

A gentleman told me about your company and that you can provide a glide assist for my track .over the years the track probable needs some aligning

I have several parts i need to order, but looking them up isnt really that easy, are you able to help me?

Hi, I need help replacing my door lock. I have attached the picture of it. The door is a NAMI sliding patio door.

Please help as I need the left & right, white crank covers for the crank mechanisms as pictured. Thank you,

Hi I need to order this part . Please let me know if you have it . Thanks

2

Hi I need 6 of these Balances and 1 install tool 4 window locks

The top roller in this photo has two wheels that have a black core with a steel edge. Can you recommend a good replacement roller from this photo?