Viewing all customer Discussions for:

Weatherization

Hi, I need a wool pile replacement for a Certainteed window. The information on the inside of the window says Half thermal. MFR 03/13/02. There is a number#411511-7 53 13 STOP 1 I don't know which size to order. Thanks, Steve

I am looking for window seals for Viking horizontal sliding double pain windows in plastic frames. The seals are gray, wool pile seals with a flat bottom which fit into a groove approximately 5.5 mm (7/32") wide and 2mm deep. I need a total length of 50 feet. Please, let me know if you have the s ... (cont.)

the part i'm looking for is a weather seal that slides in a channel on the lower edge of a vinyl replacement window - it appears to be a semi rigid rubber or plastic, sits at the outside edge of the sash, silhouette is round with a small lip at the bottom, like a Q.

I'm looking for weather striping to match existing, picture shows aluminum backing in channel in the door, picture shows "wool" has been removed and section. Sketch shows dimensions. Please advise price and availability. Thank you Eddie

Hi Swisco Customer Care, I am trying to install new weatherstrip on a commercial door. There is a Wool pile weather stripping on the back of the door against the frame. The bottom of the wool pile that goes into the frame channel is 1/4" The current height of the pile is 1/4", but likely ne ... (cont.)

The attached picture shows the operative door of a double door unit. Thank you. Eddie

What are the minimum/maximum design clearances for the 58-053 bubble seal? And is the 58-055 also made from Santoprene?

The part is on Anderson sliding screen door The bug flap ha 3/16 base and a half inch wool bug flap it slides in like the wool flap for windows Need a replacement

I need part number of this weather-strip. I thinks that is for a Keller window

I have Jalousie Windows with t slot bubble seals . They are 3/16 t slot width and 1/4 inch dia .. You have a t slot that is 3/16 x 3/8 # 58 135 . Do you have the 1/4 and if not do you think the 3/8 dia will work ok . attached is photo of the existing bubble seal . I used my vernier to measure the di ... (cont.)

I need Wool pile.170 x .350 for my slider. Can you get it in these dimensions?

We have a 1995 pella Doorwall that is in good shape except for the weather seal around the slider door. The door opening frame is 107.25" x 81.5" with a serial number 1-10882fs tan clad French slider. Can you please provide the info you need and then send a quote for a replacement seal? ... (cont.)

this weatherstrip is in 3 placed in the window frame. It appears to have a plastic strip in the center of the pile. i am not sure how it attaches to the frame. I will send another picture.

Needing replacement weather stripping as depicted here. The C channel portion is 1/4", and the bulb is also 1/4". Thanks for your kind attention! Vince

The track in the door is 9/16 wide

I'm having a tough time finding these. Any help would be appreciated. Thanks.

Hi, could you tell me the part numbers of the following items. Thanks Arturo

We built a new home 2002. We put Kolbe double hung windows in. We need to replace the sash weather stripping. Hope you can help. Thank you, Frank

Do you have Pile Weatherstripping, 3/16" x 1/2

How do I put the bubble seal into my screen without destroying it? The old peace in my screen slides back and forth. Thanks!