Viewing all customer Discussions for:

39-091 ROTO Casement Operator

Talked with Tim on Friday four each right and left hinges and cranks

I need a replacement for the assembly, the inter cog has broken teeth. It is a Roto P4600 (see picture). The cut in the window is 5inches long and 0.5inches high. The width of the portion with the screws is just shy of 4 3/8 inches (about 4 5/15 inches). The spacing for the screws is 9/16 inch on ... (cont.)

Looking for a manufacturer and part number so I can replace one on another window. The part I am looking for is the top silver one that screws to the back corner of the window and has a slide clip on the other end. Any help is appreciated.

Hi, I have original casement windows on a 1990's house. They are hard to crank open and then impossible to crank closed. I have to push the window closed from the outside. The handle has a code of P4601. The window locking system is working fine. I have 4 windows. Which parts do I need to replace? T ... (cont.)

I am attaching a picture with measurements of the pieces as well. I need three of the long pieces and three of the C clips as shown in photos. The bar is approximately 5 3/16" and the c clip is approximately 1 1/4".

Both right and left.

The homeowner wants to change these items to white. 2 operators and 2 locks. Windows are a milgard brand. Series 3510 casement. Product line is 032-167. There are no part numbers on either the operator or the lock.

The photos shows opening in window casing five inches long one half inch wide. The next photo show assembly installed on inside of window. The next photo shows the open/close assembly it measure five and one quarter inches long and one and a half inch wide and this sits on inside of window. The l ... (cont.)

Hi there, I ordered casement operator 39-091 from you guys thinking that it would work for what I have. I based that assumtion on a help thread from your website from 2015. The operator I have has the stamp on it Interlock World Pats P1090 which is where I came upon that thread. That all being s ... (cont.)

The operator does not work and needs to be replaced

Can you please help me identify this casement arm that is broken?

I've been struggling for 5 years to find operators like this all my hardware stores say they don't exist. It looks like they maybe called Roto or Rolo on the brass track arm. I need 2 for my bay window. A right and left pop out windows and the center picture is solid. Can you help me find replacemen ... (cont.)

Hi - Can you identify this casement operator and do you have it for sale?Thanks -Chris

I'm looking for the operator and the hinge

Welded Knight Casement from Northeast Building Products CorporationWant the replacement parts for the casement windows.

We are looking for a gear box that matches this one on picture. Name on bottom roto i4600. Do you carry anything compatable? Thanks

ROTO CASEMENT OPERATOR Product Code: 39-091 - Which direction does this open a window ROTO CASEMENT OPERATOR Product Code: 39-092 - Which direction does this open a window I have a casement window that opens to the left, wondering which operator I will need.

I just googled P4600 window crank, New Zealand, and came to this posting from 2012. I am looking for these cranks in Ontario Canada. Can you tell me if there is a distributor of these crank handles in Ontario. Thank you

I have the roto base #G2OSCP01 #39-248looks it would work I also need the operator to go with the base mine is broken I just cant find it thank you.

hi, I'm looking for a replacement part for a Roto brand window crank assembly. Not having much luck finding it. Can you help? Thanks Sonia