Viewing all customer Discussions for:

39-094 Andersen Straight Arm Operator, 9 3/8" Arm

can you use the tee type handle with the 39-094 OPERATORS. we have rental properties with anderson windows and the tenant are hard on them. also do you sell just the knobs for handles? thanks, sharon

I have an Anderson straight arm operator with 9-3/8" stamped 7192-2 Is this your replacement #39-094?

Hello, I have a 23.5x35 inch (roughly) kitchen casement window (Andersen), and the crank handle no longer closes the window. It will open, but the crank simply comes out of the fixture when I try to close the window again. Reading other posts, it seems like the worm screw has disengaged. I have att ... (cont.)

Hi, We are remodeling an older home and looking for replacement Casement Window Crank Operators. The windows are vinyl and the crank handle piece attaches to wood. These are the approximate sizes we are looking for: Left - 9" arm (3) Right - 9" arm (5) Left - 11" arm (2) Right - 11" arm ... (cont.)

I had to email these for pricing. I was unable to add them to the "identify your part". I am in need of two LH and two RH operators pictured below. I also need 4 cranks and 4 covers as well. Please respond with pricing, to see if I can place the order upon approval of homeowner. Thank you! ... (cont.)

I need a replacement crank for my Anderson casement window crank. The square plastic piece that goes on end of crank broke off and window comes off track.

Can you help figure out what parts I need? It's just under 4 inches measuring between the screws. The crank was broke, you could open the window but not close it. Thanks!

I'm looking for a matching operator for this casement window. It opens from the right side. Note the "A" symbol and the part # S-9412-1A. I just noticed another number that looks like the correct part number #1361412R that was on the other side Thanks, Bill

I need a left and right replacement regulator (1 each for a total of 2) for my Anderson windows. Please help identifying this part. Thanks!!

I think this window is from the mid 1970s -- The window etching has an XI in a circle and a JD. I do not see any other letters or numbers. The visible glass dimensions are 15 9/16 x 48 1/16. It has a straight arm operator that is about 9 inches long.

Need left straight arm 9 3/8

Swisco, Please confirm for me the operator that I need to get my window working agaign. I need, for two windows, a left and a right straight arm operator. There is just one number stamped on the arm top, 39 My guess is that I need 39-094 and 39-095. These Andersen windows were installed in the ... (cont.)

The description on the arm is Andersen WindowWalls, Bayport, MN 55003 1351318.

I need to replace the window operators for my casement windows and in reading other comments parts 39-094 and 39-095 meet all the requirements except one. The covers for the operators are 4 1/2 inches long and both of these parts,according to your diagrams measure 3 15/16. Is there a replacement ... (cont.)

Hi, I'm looking for a set of replacement hardware for an Andersen window. See attached pictures, I have many installed like the one that needs replacing. The markings on the arm say "7191 2" and on the handle they say "7191 8". I'd like to get an exact match since I have many others that I'm not ... (cont.)

The small plastic 1 inch piece that connects the crank arm (approx 11") into the metal runner on the 22x45 window is broken. Do I replace the whole arm & crank?

Anderson part number 1361310 and0532408 7191 stone

Do you have a replacement mechanism for this? I need and right and a left. Thanks. Fred

Problem is window will open but not close. The spindle backs out of the housing while not pulling the window shut. Need help.

I recently ordered replacement Anderson Straight Arm Operator, 9 3/8" Arm kits for left and right. We received the kits and the mechanism that is mounted on the Window sill is wider than the original one we have. Our present one has 3 4/16" distance between the two screw holes....the one we receiv ... (cont.)