Viewing all customer Discussions for:

39-107 Truth Hardware Operator Cover

I'm thinking this is your part called Entrygard dual arm operator product code 39-032. It's truth hardware. Short arm has 20810 and 30842R on it. It's 4 inches and 7/16 long. The long arm is about 10 3/4. Do I need the short arm bracket as well? My problem is the window cranks out but not in. T ... (cont.)

numbers 30842r U.S. patent 4.241.541 CAN patent 350.432 pat. 1982 Ineed a new mechanism with handle and plastic cover to hide the mechanism.

Need to replace 2 casement window locks on a weathergard window. Also will need to replace a window crank or 2, and plastic cover (39-104; 39-107). Do you have locks for weathergard?

To Whom it May Concern, We have a K & K casement window that was installed 30 years ago and we need to replace the operator. The only number on the operator that I found was 40471. Any help you can provide would be greatly appreciated. Thank you for your time. Sincerely, Joe

It is a Truth brand, and the # I believe identifies it is 30744 although the following #'s were also on there, 40574 and 45108. The long arm is 9.5" in length. The crank to open'close is in the middle. Do you have a replacement for this? Sincerely, Sheila

I'm trying to find replacement hardware for 2 casement windows. The old mechanism's say Entry Guard and shows # 30744 on the arm. Can you ID from this? Please advise. Thank you, Tom

We need a replacement casement window crank. This crank is on the left hand side of a verically (left to right) opening window. The whole crank is not functioning and we would like to replace it. So we need more than a new handle, the whole mechanism to open the window. Do you have a replacement ... (cont.)

The gears on my cranks on some of my windows are worn out. Need new crank/operators. The plate for the operator says "Truth" Small control arm has # 20755

Do you know what is the brand?

Numbers on the part: 20755, 30842R, 40471, pat. #1982

I have a broken operator on a Caradco casement window. The operator's single arm is stamped Truth 3075. Can you help find a replacement operator?

Viking window installed in 1993. The latch broke inside and we can't get the cover off to access inner workings. Contractor gave me the numbers 39-104 and 39-107 and I don't know if those are relevant. I assume the crank is still good but don't know how the two work together. Where can we find a re ... (cont.)

need to know where to find them

Please direct me to part number to replace operator mechanism for Entrygard Truth 30744 as shown in picture #1. Please note: Picture #3 shows pencil pointing to hinge arm attaching to casement. This "rivet nut" has come loose for the casement. Picture #4 is the underside view of the hinge arm tha ... (cont.)

Looking for a crank handle for Marvin casement window. The window was new about 15 yrs ago. Bronze I think. Thank you!

I need to replace the operating mechanism to a truth window. I would like to go bronze in color. I have window locks too. Can you recommend what I need to order for parts. The window crank hasn't stayed in place so I think the whole mechanism inside this one window needs to be replaced. ... (cont.)

Hi, I am pretty sure that the attached part is your part #39-031 and 032, but please confirm. On the back of the 10-3/4" arm has markings of "LH 30470" and on the 4-7/16" section, it's marked "20810" Thank you in advance for your assistance. Gary

I have multiple crank gear issues. I think the window will open if the gears could be fixed. Can I just ordered gear parts and make it work again. I have 4 windows with this problem. Also missing covers and some crank handles.

Caradco window. I sent pic of left inside operating. I sent pic of Right inside crank mechanism. The crank mechanism that the inside lever/handle attaches to will screw itself out to the inside as it appears to be broken where it attaches to the mechanism under the wood that hte screen sets in ... (cont.)

Pt # 39-107 5'4X1 1/8" plus cranks white 17 total