Viewing all customer Discussions for:

39-107 Truth Hardware Operator Cover

This is the crank from a Pozzi window... wondering you you have a replacement. Thank you Israel

I need both of these pieces. The crank?? and the stationary piece??

I believe these are the part numbers I got off the two old opposite hand operators. Truth Right operator Left operator Long arm 30791 307830 short arm R30842 30841L Grear 30844R 30843L Crank grear 30830 30830 I need these ASAP

I have cardaco crank out window in kitchen, these covers look like they would fit ?

The picture of the tilt window lock for left side. The open and close mechanism for a casement window right side.The designation of left and right is from inside of the window. The GLW windows were installed 1991. No stickers on inside of windows. The arm part number is L30841 no number on the plast ... (cont.)

Dual arm regulator assemblies. Left and Right. One each. "TRUTH Entry Guard" on arms. "EAGLE" on crank handle. See pictures

Window is a Norco. Crank broken - can't open or close window. Can you help me identify a replacement part? Thanks! PS I am the homeowner but I am working with a contractor to do the replacement.

Are the cranks for these window interchangeable, both for left and right opening windows?

Hello, my name is Ben and I need some help tracking down hardware for some casement windows I believe the company that manufactures the windows is called K & K The windows glass sizes are 24-1/4" wide x 54-1/4" tall 24-1/4" wide x 48-1/4" tall I need a right and a left hand for both sizes ... (cont.)

I need to replace my delmar window parts but do not know the size nor where to purchase them. Can I get help with this please?

I have a left hand casement window (see photo?)with damaged Bilt Best operators. The crank handles are no longer attached to the operators. From the attached photos can you help me identify Thanks

One of the Caradco window operators in my condo does not open the window when cranked unless the closed window is started to open by manually pushing it. There seem to be too much play in the crank rotation. The arms of the opening mechanism are marked "EntryGuard" and "20755". the Caradco name is ... (cont.)

I'm needing to change out my existing caradco French door handles to oil rubbed bronze. Do you have something that will work? I also need some replacement window crank hardware as well

Tom said in his May 5, 2016 : I'm afraid you will need a new operator Could you please identify the exact pieces I need; And where could I find them in Montreal; Or where could I ask for delivery by internet. Georges

My home is filled with casement windows. I need five replacement units for the crank handles.ss the existing ones are stripped. Names like Truth and Entry Gard appear on the arm. See photos.

Hello. Could you help me locate what I need. Three of our 1980s windows have trouble with the operators. The right window totally rusted out the bottom link which I cannot see in your models. It seems to be for support. You can see it in this picture. This is the best one. They all should be replace ... (cont.)

I have a Crestline window that needs an operator. Is this something you could help me find? Thanks. Bryan

Hi, I have a number of Caradco casement windows in my home that were installed in 1986. A couple of them have experienced mechanical/operator/crank failures while still maintaining a good weather seal, no warping or rotting and sealed double glass. I would like to fix the mechanical problems if poss ... (cont.)

Please find the attached pictures of existing window insulation. We need both Left and right Operators and Hinge replacements. Are these "ENTRYGARD

Hello, I am searching for replacement. This weatherstrip came out of a Norco casement window. Thanks for any help, Ed