Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

As near as I can tell this is what I Have Truth 40068 11 inch Single Arm Casement Operator, Right Hand, Rear Mount Dark Bronze Screw holes are 3-7/8" and 4-1/2" on center, 5-1/2" overall cast body I can not find a rear mount with 11" arm

?Do you have a replacement for a Marvin 3248 casement window operator crank assembly? I purchased the window in July 1989 and the gears are now stripped. It opens but doesn't close. The assembly arms are stamped "Truth."

The stamped numbers are close to a few that I looked through L30841 LH30470 But measurements don't match

Hi. I need to replace the entire arm. Can you help tell me what part I need? Silverline Window. Thanks

About 25 years old. Says Caradco on cover and Truth on inside of cover. Widest point of cover is 5" long. The stem (or whatever it is called) that turns the sprocket wheel just sort of corroded and crumbled.

Hello I am looking for a part number for crank handle and the actual operating arm per the attached pictures below. This is what it looks like without the cover.

I have two windows needing replacement parts for R split arm crank mechanism probably installed in 1988 when the house was built. The only id seen is the logo Truth and a number 20810. Can you please help me find two of these parts?

We are working on a remodeling project and the home is missing 4 cranks . Number on other cranks is 45001. Do you have anything that matches that.

Need the crank mechanisms

Need to know if you have windows handle

It is stamped as Truth 45275. The arm is stamped with 40267. Total arm length about 9.5" 4.5" from the end to the bend in the arm. Thank you!

Please help me determine the correct operator to order based on the attached images. Thank you!

Hi Swisco- I'm looking for 2 styles of Truth operators from the 90's. What makes them unique is that they they have a mounting base that is only 1 1/4" deep rather than the current entrygards that are over 2" deep. I will attempt to attach a couple of photos. I need left and right straight arms an ... (cont.)

Se gasto la rosca en la foto 1059, pero entiendo q si no se vende separado necesito un equipo completo.

Our Wilmar wooden casement window (around 28 years old) won't close once opened. The device appears to be stripped. Wilmar is no longer in business. Have been told we need to replace the entire mechanism. Prefer bronze to match others. There are two arms connected to the device. Not sure wher ... (cont.)

The only markings I see are Semco on the crank handle and EntryGard on the crank arm. Hope that is enough to match. Thanks!

The original is broken. The first picture is what it's supposed to look like.

Looking for the right hand crank 9 an half inch arm

I'm looking to replace a broken lower hinge on my 24" by 48" crank window. it's the bottom hinge on the left side on a double crank window. It looks like the parts you have are one piece crank arm and hinge ? Thanks, Mike

What colors are available? We need bronze