Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Truth Casement window operating system. Plate number. 40471

Need 2 handles for weather shield casement windows

HI, I contacted Jeldwen about replacement hardware for our Caradco windows (circa 1998-2002). Do you have this crank (handle and operator cover in bright brass)? This is the same piece of hardware just before and after tile demo. Also, do you know if the operator cover can be taken off by itself ... (cont.)

My painters broke these three cranks. The windows operate properly but I need to replace the outside broken parts.

Hello, I'm looking to replace approximately 10 encasement operators from the attached photos (5 RT, 5LT)...I recently received an order fro swisco but they unit(s) do not fit.Thanks!

When turning the handle, the gearing attached to the handle spins itself out. Is this part broken or is a part missing ?

Window installed 1998 Weathershield awning operator 972994 White 43" glass needs to be large operator # printed on inside of window M980714000158903 Also would like to know how to adjust window for it seems to come in closer on one side and not the other! I was trying to force the issue and the o ... (cont.)

Handles for windows

Need replacement, can you help?

Please help as the handle and the part that fits into the handle (and held in place by the screw plug) and down into the the fixed window frame fixture has all pulled out. One picture is of the two parts I need. (See "win cr5".)Thank you.Mike

Need one replacement cramnk for 1995 ish Mercury casement replacement window.

Hello, I am looking for replacement part for my casement window crank operator. Attached are pictures. The measurements I have are as follows: 9.25" 4.5" 5.25" 3" arm with a bend

I have a Truth 40078 dual arm with a crank that is labeled 1(possibly I)2 45054. The operator has broken on the inside, so I believe my only option is to replace. I have a couple of items in my cart, that look close, but I was wondering if you had any suggestions.

The crank for one of the KK windows in my guest house is stripped. Can I get a new one (or two)?

This is mounted to the bottom center of my window. I have to remove a wood piece over this operator to remove it. The window is old but in great condition and I would like to keep it. The operator has the number 45002 on the bottom by the screw holes and 30897 on the arm parts.

Hello.. I need 2 left hand and 2 right hand.. rod is 15 inches

I have a broken operator. Photos attached. Can you match this?Tom

I have two right hand opening windows that cannot be opened with the crank because the mechanism does not work. Ithey are truth products

Not sure if the model Also white. Thank you

It says TRUTH on all the parts and there are the following part numbers on the unit: Base: 45251 Middle arm piece: 31850 Also, I can't take the cover off the crank so I think the one I need will have to have it attached.