Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

I need the left hand not this phot of right hand Thanks John

I have two different Vetter window cranks from 1994. There are two photos of Window1, and three photos of Window2 Dimensions are marked in the photos. I realize I will have to remove that trim, but didn't want to do it today until I get an idea of when I could get replacements.

I need the center opening mechanism for one window and when looking from the outside the bar assembly

Howdy! My casement window operator arm is no longer attached to the window. It looks like I'm missing the pin that goes through the operator arm into the window. Can you advise? Many thanks! Stee

Need the full awning window mechanism 40511.

Need right and left opening mechanisms for 8 windows.Model # on casing 40055 Brand Malta.

I don't see any part numbers but they are marked Truth. I am looking for both RH and LH versions of both the operator and latch. The operator arm is 9 1/2" long. I am open to a different style if they will fit. I believe the windows are Norco - about 20 years old. I plan to update all the window ... (cont.)

The sprocket (crank?) is worn and cover has no collar for sprocket to stay in

Hello, My window operator won't fully close the window, I think the teeth are damaged. Can you identify this model? I couldn't find any manufacturer markings on the window. Thank you.

Hi I have a window in the bedroom as shows in attached picture. The operator crank failed to close. I removed the operator but as it shows in the picture the end parts broken.How should I replace a new operator if I find one? how should I remove the remaining end parts from bottom of window?Do you h ... (cont.)

Entry gard Truth The part I would like to replace is the bottom rusted bar that is attached to a track under the window sash. The bar is 5 inches and the track under the window sash is 7 inches. Thanks!

I need help figuring out which parts these are so I can order more.Thanks!Beth

Looking for this part

I'm looking to replace this crank. The straight part of the shaft is approximately 13 inches long from the end to the bend. Truth is printed on the shaft. Thanks.

This product was made by truth hardware I can't seem to find it on their site there was a number on the arm of the mechanism it is R30842 and I didn't seem to have any luck with that either the window is in great shape it's just the crank out pin gets stripped or chipped and even the mechanism is ... (cont.)

Need 2 of the above

I am renovating a house and discovered that this small window in the basement shower will not open/close because the hinge is separated from actual window. There are damaged black, plasic parts (I've circled the in red) that connect the hinge to the window. They are both cracked. The handle on the c ... (cont.)

part no. 7073b rours is stipped do you have a re-placement

Op05-7509-03 is the crank Handle is op05-1509

I'm looking for the replacement "clip" and "track" that hold the window corner in. In the attached images, the clip is out of the track and rotated 90 degrees so it is perpendicular to the track that I think it should be riding in. The crank and other levers are intact and pull the window in, but ... (cont.)