Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Norco casement. Left hand window

Truth brand. Multiple windows have cranks that open window well but spins freely in trying to close window. Pictures show main dimensions and markings.

Looking for a replacement for Truth item #45001, crank handle that mates with crank arm #45035.....looks like 12 teeth on this shaft.

Caradco is exactly what I need however I need it to be 11". Do you carry an 11 " Caradco window crank?

Hello, I need your help in identifying and determining if you have in stock vinyl casement window opener. They have Roto emobossed in the part. I require 4 Right Hand openers and 4 Left Hand Openers. The Right Hand Opener had OP051505 on it. The Left Hand Opners had OP051506 on it. They are ... (cont.)

The piece the handle sticks out of is 4in. The piece attached to the window is 12in and the diagonal is 8in.

This is from a new condo building built this year. It looks like your handle 39 114L. It has 2102 R2 stamped inside and I believe it measures 11/32" spline. I need to replace these handles due to shade interference. Do you recommend your 39 205 or 39 107FK? My window color is silver...so I w ... (cont.)

I have this operator on a vinyl replacement window. I would like to use this unit on an Andersen wood awning window from the 1960's. It's 41" wide x 18" high. I think I can modify the sash to receive the scissor hardware but I'm not sure if it will push that wide a window out properly. I like the 15 ... (cont.)

Hello, I need several replacement window cranks handles for my Weather Shield casement windows which were installed in 1985. The number on the handle is 45001. If I order a part which does not work for me, what is your return policy? Thank you, Kathleen

the operator I need is from a roughly 20 year old Wenco casement window. From the inside of the house , it is the one to open the right window. I need two of these and one which operates the left side window looking from inside the house.

I am in need of Delmar window parts for which I have attached pics. (1) crank mechanism, 4" body width. (3) securing slide brackets. (2) lock handles with pins I also need (6) screen retainers (turning butterflys that capture screen inside the room). Thanks, Jeff Anderson DID THIS GO ... (cont.)

I am looking for the hardware for a left and right hardware window mount as is in the picture. Please let me know if you need anything further.

I have a window opener that says on one of the arms and there is a stamp on the bottom of the mechanism that says 7701.

I hate these cranks and would like something a lot more low profile for my windows. Do you have a recommendtion approx 20 cranks. I have a very good handyman who could do the work.

I need a complete set of left side replacement parts for two of my Waterville windows. the mechanisms have rusted away. enclosed is a photo of the mechanism for the other window. I also need the replacement parts that attach to the window itself. it's the pivot side that attaches to the bottom ... (cont.)

The window-crank assembly does not have any markings on it. It was made by Malta. Can you replace it, or do you know who might be able to? Thank you.

Looking for a right hand truth hardware crank 13.5" Part #40055 Bronze with a 11 3/8" track

These are from windows installed in the late 1950's

I need to replace both the right and left cranks/arms of a bay window of a house I purchased. Not sure of window brand. Arm of crank has rimco stamped on it. Please help Jason

need two different replacement arms and cranks. Please let me know the part numbers so I can order the correct parts.