Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

I

The Entry gard piece indicates R for the piece need in bronze. We took the number from the left side window. Also we ordered an operator covering braze and we received bright brace instead bronze. What is the next step in returning the operator cover to get the BRONZE? Thanks Dothlyn ... (cont.)

2 casement window cranks have become stripped (or something) and are no longer functional. I need help in assessing which part(s) to buy. #'s on the inside of the present handle are 45012 / US patent #4.083.804 / Canadian Patent 1979. I would need new handles and the crank operator mechanisms ... (cont.)

I purchased a house with a missing casement operator. I am looking for help in identifying a new one. I hope the attached pictures are enough to help figure this out. If unable to find the exact part I would settle for one I could make work with a cutting and caulk.

Can't find any markings to ID the window or the operator/crank. Both left and right cranks seem to be stripped. Right crank can screw right out of the operator mech. Any help is greatly appreciated.

Having difficulty finding the exact size of this product on your website. In addition to the pic these numbers are on the unit. I am not sure what brand the windows are so not sure these numbers will help. OP051506 or OP05-7533-03 and finally 08:34:40

I purchased a house from a bank that came with... well, missing some parts. I'd like to be able to open my manual skylights, but I only see splines pointing at me. As you can see, I think these can use your 11/32" universal parts, but I wanted to ask first.

Hi, these were on Malta windows from 1998 and we need to replace the sash and the crank. Do you have a part that will work? Thanks, Jacque L, REALTOR REMAX Checkmate

They are truth window cranks, looking for 2 rights and 2 lefts. They are 13 1/2 inch ,do you have and how much.

Your web site says that you can identify a part by the picture. Do you have this crank handle?

frontwindow and bay window

Need two left handed full replacement units. The part numbers on the back are 0P05-7554-03 Date of 05-011-05 Another number is 65276.

Need one clay colored window handle crank stamped US Pat 4.083.264 Can. Pat. 1979 45012. Non folding. Round (non notched) opening is 11/32". Fitting into a square: Length is 3 1/16". Height to center of round opening is 2 1/4 ".

U.s patent 4,083,264 Canadian pat. 1979 45012

The arm says...Entry Guard, then there is a picture of a house on it and then the word TRUTH is on it and is underlined. There is also a number that is 20810. The frame of the window is wood and I believe that they are original from the 1970's

Hi, I am looking for the hardware for my 4300 Designer Series Casement windows made by Acorn which I understand is out of business. I need roto operator assemblies, cam action sash locks and cover plate attachments. I have part numbers if you need them

Hello, I had window shutters put in and I need an extention for my crank to come out past the shutters to turn. Looking at your 4" crank are they pretty standard for all casement window crankers??

Hello. I need a replacement for this Truth casement window operator. It is a dual arm and probably was manufactured around 1990. I looked at the Truth web site and the closest there is the Entrygard Dual Arm operator. But the gear for the smaller hinged arm for my part is not located in the same pl ... (cont.)

Is this Truth folding Handle + cover kit compatible with the 39-013 and 39-014 operators? I need about 40 of such operators and want to find a compatible handle for them. I am thinking of getting the Crank handle (39-114L) but if this part is compatible with the operators it will be a bonus for ... (cont.)

There are two windows I need replacement part on the first two pictures are of the lock that is on the window the others are of a handle that broke