Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Hello, I'm looking to purchase 2 window cranks. They say ( Thermal Gard ) on the handles. On the cranking gear box it has the name ( Truth ) on it. One has the # 30637 and the other has the # 30636 stamped into them. They are located at the bottom of the window in the middle of it. The hinges on the ... (cont.)

4 inches wide, arm is 12 inches long...the name on it is TRUTH...number is 45251

What is the part number for a handle to this operator?

Four inch wide base. Four screw attachment plate. Nine and half inch arm.

Hi As per the attached picture I need to replace the entire crank system for my casement windows. I have 6 to replace. Do you have ones similar to these. Thank you Jo Ann

I have four of these Thermal gard cranks. The windows have double latches which open simultaneously (if that helps you identify the brand) All of the cranks are in need of replacement for one reason or another. My guess is 25 years old?

Hello! I came across your site, as I've been having a hard time identifying a replacement window crank... As the existing one is stripped. The original is by Weather Shield - Medford, Wis. numbers on reverse side of handle are: PAT.4,083,264 PAT.4,189,248 45001 I do not have any add ... (cont.)

Good Morning: Attached please find photographs of a broken window crank. The only identify marks are the numbers on the window hinge and MW on the plastic crank cover. The end of the spiral crank has broken off and I cannot close the window with the crank.

I have Caradco windows in my house, I need to replace a Casement Window operator. There is a number in the back of the casement which seems to be the part number, the number is 40056 RH. I believe RH means right hand. If this is correct, that is the side I need, however the Casement Window operator ... (cont.)

Hello, we are trying to fix what is wrong with our windows and it starts with the window cranks. I have included 4 pictures showing the crank handle (number inside handle is OP05-7810), the crank posts (with numbers HG04, 2004U and 052020) and the crank housing. I don't think I need to replace any ... (cont.)

I am looking for just the end piece of the window crank for my casement window as our dog has chewed them. Do you have such a part?

Great site. Photo shown under "Need help with replacement parts" (Customer questions & Comments) appears to show my existing conditions accurately. My question is with the replacement crank model 39-114L. What material is the crank handle? My existing is metal and looks just like the one shown i ... (cont.)

The crank has fallen off and just turns. The part is by TRUTH and says Made in the USA. Pictures attached. Do I need to replace the whole operating mechanism? Thank you.

Dual Arm Crank, 16-1/8" Product Code: 39-140 does this come with crank & brackets that push window in & out? in other words all parts that are shown in picture? Jerry

I've got a couple of windows whose casement opener gears appear to have stripped out due to windows being painted shut. I'm not sure the brand of window, but they're double-paned and the opener is inscribed with "Truth 30382" Help would be appreciated! Attaching images.

I am unsure of the type of windows we have; there are no identifying marks. The spindle (I don't know what else to call it) that goes into the handle and has a screw at the end is broken. It is the only part I need; I cannot find it anywhere. It is 2" long and about 1/8 inch diameter at the handle e ... (cont.)

I need four......two right and two left plus the handles.

Kolbe windows installed in 1995. Please help There are 52 windows. Not sure how they are called out properly but from the inside as I look at them I have 27 units with the crank/hinge on the left side and 25 units with the crank/hinge on the right. Listed below are the part numbers I believe a ... (cont.)

I have a Barber and Ross Casement window in my kitchen that was installed when the house was new in 1995. The crank can open the window but when you turn the handle to close it, it just spins. The kitchen as two windows that open out from the center with two cranks and both have the same problem. I ... (cont.)

We have crank out window with regular handle that does not fold. Can the handle only be replaced with one that folds up? If so, how is it done?