Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

We had casement windows installed sometime around 2001. I don't recall if they are Marvin or Anderson windows. Somehow we lost two of the operator covers and never made the effort to get replacements. Picture enclosed of both crank without and with the cover. The opening is 5 1/4" x 1", and the ... (cont.)

I call you this morning (5July) and you suggested I send pictures of the dual arm crank (Operator) I am trying to replace. I need your folks to confirm your model 39-140 is similar in size to mine. Photo #1 is what it looks like in general Photo #2 has a width (as the user faces it) of 5 1/16 i ... (cont.)

Hi, I am looking for a replacement for the attached window operator (will need a few). The part has a backwards "L" followed by a 2 on one side on the back, and "LH" on the other.

Hi -- The crank base is 5 inches (length). please see the picture for specific look. Also, the crank handle has a #45012 and says US PAT#4083264. We need a full replacement for the crank handle and operator (it seems to be striped). Thanks, Sian

I'm looking for replacement covers for my casement window crank handles. I was able to contact Atrium and based on the warranty number I found on the window, they said my windows are Model 871 New Construction. I have about 6 windows where the crank cover is cracked. Any chance you'd have these? ... (cont.)

My operators seem to benin good workin order. Just need handles,(price) for residental home approx. 18 years ago.

Hello, I'm looking to purchase 2 window cranks. They say ( Thermal Gard ) on the handles. On the cranking gear box it has the name ( Truth ) on it. One has the # 30637 and the other has the # 30636 stamped into them. They are located at the bottom of the window in the middle of it. The hinges on the ... (cont.)

4 inches wide, arm is 12 inches long...the name on it is TRUTH...number is 45251

What is the part number for a handle to this operator?

Four inch wide base. Four screw attachment plate. Nine and half inch arm.

Hi As per the attached picture I need to replace the entire crank system for my casement windows. I have 6 to replace. Do you have ones similar to these. Thank you Jo Ann

I have four of these Thermal gard cranks. The windows have double latches which open simultaneously (if that helps you identify the brand) All of the cranks are in need of replacement for one reason or another. My guess is 25 years old?

Hello! I came across your site, as I've been having a hard time identifying a replacement window crank... As the existing one is stripped. The original is by Weather Shield - Medford, Wis. numbers on reverse side of handle are: PAT.4,083,264 PAT.4,189,248 45001 I do not have any add ... (cont.)

Good Morning: Attached please find photographs of a broken window crank. The only identify marks are the numbers on the window hinge and MW on the plastic crank cover. The end of the spiral crank has broken off and I cannot close the window with the crank.

I have Caradco windows in my house, I need to replace a Casement Window operator. There is a number in the back of the casement which seems to be the part number, the number is 40056 RH. I believe RH means right hand. If this is correct, that is the side I need, however the Casement Window operator ... (cont.)

Hello, we are trying to fix what is wrong with our windows and it starts with the window cranks. I have included 4 pictures showing the crank handle (number inside handle is OP05-7810), the crank posts (with numbers HG04, 2004U and 052020) and the crank housing. I don't think I need to replace any ... (cont.)

I am looking for just the end piece of the window crank for my casement window as our dog has chewed them. Do you have such a part?

Great site. Photo shown under "Need help with replacement parts" (Customer questions & Comments) appears to show my existing conditions accurately. My question is with the replacement crank model 39-114L. What material is the crank handle? My existing is metal and looks just like the one shown i ... (cont.)

The crank has fallen off and just turns. The part is by TRUTH and says Made in the USA. Pictures attached. Do I need to replace the whole operating mechanism? Thank you.

Dual Arm Crank, 16-1/8" Product Code: 39-140 does this come with crank & brackets that push window in & out? in other words all parts that are shown in picture? Jerry