Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

I've got a couple of windows whose casement opener gears appear to have stripped out due to windows being painted shut. I'm not sure the brand of window, but they're double-paned and the opener is inscribed with "Truth 30382" Help would be appreciated! Attaching images.

I am unsure of the type of windows we have; there are no identifying marks. The spindle (I don't know what else to call it) that goes into the handle and has a screw at the end is broken. It is the only part I need; I cannot find it anywhere. It is 2" long and about 1/8 inch diameter at the handle e ... (cont.)

I need four......two right and two left plus the handles.

Kolbe windows installed in 1995. Please help There are 52 windows. Not sure how they are called out properly but from the inside as I look at them I have 27 units with the crank/hinge on the left side and 25 units with the crank/hinge on the right. Listed below are the part numbers I believe a ... (cont.)

I have a Barber and Ross Casement window in my kitchen that was installed when the house was new in 1995. The crank can open the window but when you turn the handle to close it, it just spins. The kitchen as two windows that open out from the center with two cranks and both have the same problem. I ... (cont.)

We have crank out window with regular handle that does not fold. Can the handle only be replaced with one that folds up? If so, how is it done?

Hello I have a casement window with a broken crank handle. I have included a few photos of the crank for you to see. Could you let me know where I can get a replacement?

Part # 30748 along with 10" attached to window frame see images.

Can you get me a replacement crank? The crank has the following stamps: U.S. PAT 4505601 PAT CANADA 1986 U.S. PAT 2135397 45002 MADE IN U.S.A.

I am looking for folding cranks $ covers for Caradco casement windows. Do you have a product that will fit? Thank You

I have a Hurd bow window in this house I just purchased with a malfunctioning operator. The window was manufactured circa 1993 (the house was completed in 1994). The operator (shown in the photo for the left casement) is a single arm. I estimate the window to be about 20" wide. I want to replace the ... (cont.)

I need to replace 4 Caradco window cranks and hardware. Are the cranks standard for all windows or do I need a serial number, if I do where is it located on the handle. How do we determine if the crank is a left or right opening operator? We can't open the windows to check bc they arevery diffic ... (cont.)

I need to replace the part being discussed on Swisco. I ordered the same part in 2009 from BestBuilt Windows. They are not available by telephone. The crank handle has popped, and I guess I need to replace the whole mechanism. The part number on the invoice was 40001000. The number under ... (cont.)

I need to find 3 of these - just want to make sure I order the correct size - th epart # on it says 45012U.S. Pat. 4.083.264 Can. Pat. 1979 45012

Hi, I'm looking at Sill Mounted Awning Operator Product Code: 39-348 and it looks like the Truth hardware I am replacing. Same width, 24", from post to post that connects to the rail but it doesn't say how wide the middle section that the bars and crank attach to is. Mine is 5" by 2.5" and would ... (cont.)

We need to replace hardware for Caradco casement windows. The mechanism, arms, and handles. Are there different sizes and dimensions? Can you tell me what would best match the attached pictures? I'm hoping you will be able to respond immediately and appreciate any help you can offer. ... (cont.)

Hello Swisco, I have one right hand and one left hand casement window with damaged Bilt Best operators. The crank handles are no longer attached to the operators. From the attached photos can you help me identify the parts I will need to order? Thanks in advance for your help!

does it match operating sysmems 39-091,39-092?

Hello, I'm hoping you may be able to help identify (and possibly replace) a rather mysterious crank cover window part (I think it's called a "Pull") that I've. It is the cover that goes the mechanism of a crank window opener (see attached files). I don't need the crank or the mechanism, but I ... (cont.)

how do I know which spline I have? it is written TRUTH on the handle thanks for answering to me