Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

This window crank needs to be replaced

do you have an equivalent part? for both the left and the right windows.

Need to replace this casement handle, arm, and hinge.

Hi. This is a truth crank mechanism. Which is the correct cover and crank? Thank you for your help.

Truth Hardware 10" 2 Right Swing 1 Left Swing

This is a plastic casing for operator with the letters GU I only see 39-188 but my bar is 5 3/8 long . Will it still work. I know I'll have to drill new holes into frame to secure

Arm looks to be around 9-1/4 inch

Casement window 25 1/2 by 50 1/2 dimensions inside trim . Need new operator because it is stripped out in the closed position. Brand name on current opener is Truth.

Truth 30905 Window hinge on left

Truth ellipse straight arm operator 3/8 spline

hi- I need a replacment crank for the attached photos. Thank you

Looking to Identify a Window Crank mechanism on a casement window, it is a wood sash with exterior vinyl glazing bead if that helps at all. I dont see a manufacturer tag anywhere, but the stamp on the mechanism arm says Truth 30805

I need replacement cranks for Pella windows installed in early to mid-1980s.

I don't see any markings on this part. It is in a house we are flipping we just need the handle for the window crank. If possible.

30818 , older window sliding arm seems to be about 8 1/2 in

I need to replace the window cranks on several of the casement windows in my home. I hope the photos attached give you enough info. to know what I need to buy.

please help identify

Can you find in your stock a replacement or something that I can replace it with I cant find the manufacturer of the window and the only stamp on the arm is GU with some kind of arrow after.it's a double hung casement kitchen over the sink window with a left and right side crank; See attachment for ... (cont.)

Could you please help me identify the correct operator mechanism for a casement window?I’ve attached pics for reference. Thanks in advance for your help!

I recently moved into a house with manufacturer stickers like the one attached on them. I think they are "SNE Enterprises", which later became Peachtree, but not sure. The handles have a plastic insert that goes onto the spline and is secured with a small slotted set screw. The plastic inserts have ... (cont.)