Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

I have one bar (arm) Truth hinges with the number 40942-A stamped on the bottom hinge. I'm assuming these are no longer being made (they are on 25+ years old Marvin windows). Does the 2 arm- Right Hand (Standard) Casement Window Hinge Assembled 10" replace the old one arm 40942-A. Will I need a ... (cont.)

Which operator do I need? Casement window is 27" wide. Short arm 4 7/16" Left handed. Is it returnable if the repair man to fix broken glass has an operator in stock?

I need a couple cranks a couple latches and a few of those plastic clips.

I need to replace my operator on my casement window. It is stamped Truth and I can see a number 30744B. The arm is about 8". See the attached photos.

I have Loewen windows that were installed 2001 or so.Screen pins.Awning window cranking mechanism.

Made in USA; it says TRUTH on the top side of the arm

Handle gear does not stay engaged when closing windows. Crank stop maybe broken. Looking for 2 replacement screw left and right side.

Hi, Can I replace stem. handle and cover, or comleete mechanism for this RT side casement window?

Looking for help finding the correct replacement I didn't see one with the correct arm length any help would be greatly approved.

I've attached an existing one from a different window. The one I'm looking for to replace is opposite (mounted on the right side, window opens on the left). Thanks

Hello dear, I have half dozen of these operators above not functioning properly as they keep skiding when being turned, please refer to photos & advise which parts I need to order & how to replace them. thanks.

won't crank out

I have one window that is completely separated from the mechanism on each side of the window that assists the window open and close smoothly. I'd like to replace the components that are on either side of the window. I uploaded a few pics of the parts that were visible. Not sure if there are addition ... (cont.)

I have a two-pane window above my kitchen sink that has a crank mechanism on each window. I would like to replace the two crank mechanisms. I uploaded some pictures.

Crank/gear window handle

Hi, I have a broken crank mechanism and not sure what I need. I have attached a photo. Please let me know. Thanks.

Hello, I need some help identifying this window crank. The arms are ~12" long. The handle assembly has some stripped parts in it that are preventing it from opening and closing properly.

long arm is 9"

There is a main "Entry Gard" arm. But there is a smaller arm at the top of casement window and at the bottom. The top is fine. The problem is that the home sat for 5 years and the bottom small arm rusted off. #6799 in the pictures. Its a 6" piece that connects to a screwed in piece on the botto ... (cont.)

I measured #20810 at 4 7/16 main arm 9 3/8 large numbers on part R30842. I could reuse the old crank and cover