Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Attached are pix of the operator. Arm is 9 1/2" center to center, 9/16" roller on the end and widest screw holes are 3". No ID other than RH LH and the number 30350 on another arm attached to the window. Searching I find part numbers 39-027E and 39-028E to be a close, am I correct? Thanks. ... (cont.)

I have two casement windows that do not close properly due to a broken plastic slider. See photo. I believe they are Harvey windows, probably about 25-30 years old.

The window crank for the right hinged window is broken, window cannot be opened anymore. The other image shows the opened opposite left-hinged crank as an example. The smaller crank arm has the number 20810 imprinted on it. The cranks are found on Crestline Casement windows.

Need a left and a right side

Part is from an older Harvey casement window about 1988-89. Only numbers found were US. PATENT # 4505601, UK patent # 2135397. Housing is 5.5 inches long. Mounting holes to center to center distance 5-1/16 inches. Height is 1-1/16 inches. Long pivot shaft total length is 4- 1/2 inches. Handle is mo ... (cont.)

I'm having trouble finding something that matches. Truth Body 45135 Truth Arm 40352 Truth Linkage arm 30905 Need both left and right, white. Thanks.

For Kolbe windows, Truth hardware. Need a replacement white handle.

The dual arm window hardware on a Norco French window-approximately 25 years old-needs replacement. In one piece of the hardware the number 20755 is stamped.

No markings other than "made us usa" and "Truth"

Need access to screw holes in bottom of window. Mechanism won't secure to fiberglass frame, .

I am looking for casement window cranks for left and right opening windows. The following markings are on the original crank: 45035-RH, TRUTH, RH, 3.

Need a replacement window crank. Caradco part Gear is stripped. Crank is on right side of window Opens from left side to right. Will probably need to replace more .

Good morning, I'm looking for the following replacement parts for my existing Semco casement windows (vintage approximately 2002):1 - operator mechanism, see attached 3 pictures showing arm lengths and orientation 1- handle for mechanism (bronze)2 - operator covers (bronze)1 - latch (right hand side ... (cont.)

Replace window casement window crank

These were Peachtree windows that were put in about 35 years ago. As you can see from the photos it opens out to the left. The number on the mechanism is 2081. And the wrds on the mechanism are Entry Gard TRUTH

The picture is of the opening and closing crank. This is for a Marvin window bought sometime in early to mid 1980's. The window is 141/2 in. Wide.

Looking for replacement for awning mechanism c2004 lindal home

Hello I'm looking for this crank and handle, it is 13-1/2 arm and needs to be rear mounted and black finish, I need 5 left handed and 5 right handed you can reach me by email, thank you and hope to hear back soon

Help finding this

Hello. We have 2 clad case master Marvin windows. The cranks (part number 10898240 ) no longer work. They are discontinued. There may also be a problem with the operator too. When the cranks did work, we could get the window to open. However, to close the window you'd have to lean on it from the out ... (cont.)