Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Our crank doesn't open the window any more. Cover is cracked also. I see entry gard and truth on the mechanism

hi. I need various parts to replace. I noticed that some of the reasons for the windows being damaged are small plastic parts have become brittle and have fallen off causing part to come out of track.

Need lock and handle mechanicals Handle 30905 true hardware Lock latch 31402 true hardware White handle

The one number on the mechanism is 30905. This window does not crank the window in closed enough for the window latches to be able to grab and latch the window closed. I had to make up and install a little wooden knob on the window in order to pull it in by hand so the window could be latched closed ... (cont.)

Ellipse Style Single arm operators 9-1/2" and crank handlesFor the photo labeled 20230821_091208: I need a qty. of 1 For the photo labeled 20230821_091106 : I need a qty. of 2All 3 should be the Ellipse Style single arm operators and handles in beigeCan you help me determine which parts #'s I need ... (cont.)

I have vintage 2005 Solaris casement windows. Some of the cranks don't work anymore as the plastic piece that holds the set screw is cracked. I have attached pictures. Near as I can tell, the post has 12 teeth and is 5/8" in diameter. It is a folding crank. Do you have anything like this (foldi ... (cont.)

Looking to replace 3 right and 3 lefts with 6 new handles

I purchased a replacement from you based on the part # on my part and a question and answer guy that I thought was from Swisco. Can you help me?

This is from a Kohler window made in Canada. The opening through which the crank mechanism is inserted is 3 1/2" long by 1/2" high. The length of the arm from the end to the angled elbow is 12" and the elbow itself is 1 1/2". We wish to order two (2) of these operators (same dimensions and openin ... (cont.)

This is a casement crank assembly. Truth Brand. Can you tell from the numbers the correct replacement Thank You

Look to be original openers. Windows may be as much as 30 years old. Need new openers for both left and right windows.

The hard is in a Bonneville mulled double casement. We'll need one left and one right hand. The mechanism has become loose over time and falling out of the guide track so it requires removing the screen to pull the window in so the outside "roller" beyond the middle of the guide track then the mech ... (cont.)

Hi, I'm looking for a window operator for my mother.

Here are photos of two different operators. First one is a 45251. Second one has numbers on parts, 20544, 30470 L.H. and 30636. I need to replace both of them.

it made by truth

I need new crank mechanism for this awning window, please advise whatcha part to order,Thank you,Jason

The Dyad crank 5" operator #39-089 is a 5" hole on center and the arm is 5" . I need it with a 4 7/16 arm.

Built my house in 2002. This is a Norco brand. I have a handyman who will install if I can find a compatible operator. Maybe Product Code: 39-028E ??? Anyone who can assist, will be much appreciated.

replacement crank gear box 091620040423 truth windows

Trying to replace an old casement handle that has stripped grooves inside. I measured and thought that 3/8" bore was correct and I purchased item 39-104. Unfortunately the bore seems slightly large for the male portion on the window. I am enclosing pictures of the old handle. Unfortunately I can't f ... (cont.)