Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

I've had these Seaway windows for 30 years, the actuator on this window lost a couple rivets and I need to replace it. Can you help with a new actuator?

Two small crank out windows on both sides of bay window. Haven't been used in over a decade. Need to replacements. Stamped number on one arm is L30841, r other arm is stamped R30842. Pictures attached with measurements on tape ruler. Can you assist?

Gear inside mechanism must be stripped! when Opening or closing crank its a dead spot and handle turns ,but window does not move!

These casement cranks + operator look between a brass and stone color. They are original to the house built in 1970. Some are stripped, and we must replace them quickly before house closes on September 4th. Would like done before inspector looks over home. They have a logo which I'm guessing is SM C ... (cont.)

I need replacement hardware. The nipple the crank attaches to has sheared off. It looks like metal fatigue.ThanksGary

Recently moved in to our house and found one of the windows fell off the hinges. Looking at the markings it appears to be a two bar hinge that someone else also posted about(pic 1 with all the measurements). Would you have those in stock? My house was built in 2008. Thank you.

Hello I need parts for this window. Can you identify the maker by these pictures? I need the scissors opening mechanisms

I need 1 left crank and 2 right cranks photo is of the left crank ! I

Need bracket where handle attached to

L 31538A on the part, the winder is inoperable.

1 x Peachtree Ariel Awning Window Crank Handle SKU: 35570334 2 x Peachtree Ariel Awning Window Sash Operators SKU: #35570355/ #35570350 Size: a. 29-120-2 (fits 36"/42"/48" sizes, not handed) Color: Driftwood 1 x Peachtree Ariel Awning Window Sash Operator arms measure 25" when fully retracted. f ... (cont.)

Please if you know which crank this is

Can you help me identify these items?

There are markings on one of the enclosures. Some windows swing open on the left and others on the right

Hello. I need to replace my Truth Split Operator. I've included measurements in the photos. I thought 38-317 would be the part, but the measurements don't match. Thanks for any help you can give.

Hi, i'm in Yellowstone NP and trying to repair a mid-century window control arm on 3 windows. They have a chain type control arm that slips into the metal box you see in the foreground of the photo. The name Getty is stamped into the crank handle. Thanks

My window is missing the piece that connects the handle to the cogs/gears on the opener. I have the old cover but it is badly discolored. I also have the old handle but it is damaged. I was able to slide a piece of half inch dowel into the barrel opening up the gear cogs.The hardware has the word "t ... (cont.)

I need to replace this crank arm including the hardware on the top of the window

Can you help me identify a replacement part?

Hi. Included are 2 pictures of my wondow crank that needs replacement. A tooth from one of the gears broke. I point it out with my needle nose pliers. Thanks. Ted