Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

The arrow points to the name Wright. The dot shows the #07900. The crank handle has the name "hurd."

Hi, We have very old casement windows and the handles are starting to break off. Inside the handle, it says 45054. Do I need to replace the entire mechanism? It looks like this one is more than just the handle. What do you recommend? Eva

Teeth of swing left window (viewed from inside looking out) are broken so window won't open. Need a replacement for it.

Please help. Need right and left

I need to replace the operator on a couple awning windows. The photos show the operator installed. Each section of the crank arms are approximately 9" long. The windows were purchased through Sears about 37 years ago. In looking at your awning window hardware on your website I found PN 39-0837. ... (cont.)

Hi,I need help with replacing the hardware on these older windows I believe from the 80's.There are 8 total but I am sending pictures of these 4. I drew the dimensions on the pictures.I can customize as much as you recomend so don't worry if yhere needs to be modifications to the wood. ... (cont.)

When looking from the inside out , need 3 that window opens to the left and one window opens to right. Long extender bar measures approximately 81/2 inches. Can you help me out.

I believe this is a truth part. Say LH as can be seen in picture Also the arm has this number 501-11-3L

This gear doesn't work anymore. When I try to close the window, the whole gear backs out and doesn't operate the window. Can I replace it? Or should I replace the whole operator? 25 year old aluminum clad window

can you tell me what i need?

When I cranked the handle no longer catches to open or close the window.

Hello, I'm looking for help identifying this. It's about 10-11 inches fully extended. Do you have this part?

Good morning,We are looking to replace our Pozzi window cranks with the foldable kind. Do you have replacement foldable cranks we could purchase?Thanks so much,Dann

The gears are stripped inside need new crank handle off Truth swing out casement window

I need replacement hardware for my window. Was able to see the words, Entry Gard Truth and the numbers L30841 and 20810. Please see attached photos.

Need part number s for left and right please.

I have two crank arm operators that are the same just left and right. I can make out TRUTH and D206

Hello, 22 years ago I installed Silverline windows in the house I was building. I think that the UV rays or just age has caused many of these handle mechanisms to crack, keeping the window from opening. Do you have replacement mechanisms and new handles?

Hello, The worm gear that turns the cogs to open/close the window has become dislodged from its base. I see that there are matching grooves on the side of the worm gear housing and the internal aspect of the base. Can these two parts be put back together again by applying force to the worm gear t ... (cont.)

I have a casement window that needs the dual arm operator replaced (truth entryguard 30744). The window swings out and to the left + has the crank in the center (not the type that folds down). Can you tell me the correct replacement part?