Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Hello- We have truth window hardware (we think from the 1980s) and the small part that goes into the crank handle appears to be damaged so is no longer catching the gear properly to crank the window open. Is this a smaller part we can replace or do we need to replace the entire operator system? If ... (cont.)

The crank assembly in pic 5705 will open but not close the window. When attempting to close, the handle screws out. The other photos are of the mitered lower trim pieces on the window exterior. The photos are of 2 different sized windows.

#0490 is how the mechanism attached to the window #448 & #449 how the Mechanism attaches to the window frame Crank broke away from the mechanism Thank you

We just purchased the a house and the windows have no crank handles. I need to identify the type and get new handles.

I have two windows that are missing the stem, the cover, and the handle. I read a post from someone to Swisco that I may need to replace the EntryGard Dual Arm Operator, 39-031 and 39-032. I looked at it online and it shows that the long arm is 10 3/4" but mine is only approximately 9 1/2". The shor ... (cont.)

dropped the window when installing Ac and bent the operator arms.

Attached is picture showing the part # 30905 white color

Don't know windows manufacturer, 20 years old,

Pozzi

We Need replacement window hardware to match this picture. Can you help us?

The number on back 40053

Hi, I am looking for the 'Right Hand' swing arm that has the name 'Truth' and the number '30905' written on it. Please let me know if you carry this part. Thanks! Visty

Need to replace rusted out mounting to crank arm?

I was looking for a replacement for this window operator...tried a few different ones but can't find one that fits

Looking for replacement of a left and right operated case Ment window as shown in pictures

Some part #s on the Truth entry guard- 30842R; 20810 and 30744. Need left an right for 22" windows.

We are looking for this crank, but have been unable to find something similar.

Looking for replacements. Not sure what I am looking for Thanks

Hi, I am trying to replace this awning window operator. The handle comes right out with the insert connector. It is stamped Truth on both arms, but I see no part numbers. There are two arms that are about 10 inches extended fully and about 23" when closed. The window dates to 2008, if that's a ... (cont.)

Not sure the make. It measure about 21 across the arms when closed. The handle opening is 5" x 7/8". It is white center mounted crank. They window is about 15" x 36"w ....opening about 8-9 normally.