Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

Brand: SimontonType: CasementOpens: Hinged on right looking from inside.Photo is of an identical window. I broke the operator shaft at the crank handle, and need a replacement operator.Thanks,Paul

Purchased two crank hardware from disco but the do not fit. 39-089 and 39-090 arm (first arm) is too long. Please let me know if you have the proper hardware to do the replacement. I'll need to return the two I received. Thx. Rich

What replacement options would you recommend for the Truth window crank operator in the attached pictures? Do you recommend staying with a Truth branded window crank or would you recommend another manufacturer?

Since the mechanism isn't cranking window in and out anymore, I am assuming I need the gear assembly. Or what is best for longevity.

I would like one left set of hinges and controller for this window.Include all hardware ,screws ect.. The hinge is 103/8" x5/8" #961747/03 v3lh 29.75x45.625 V3LH COO26

spinny handle that cranks the window open (swings left) Not sure of brand.

I'm trying to figure out which new crank to order. My old ones have the numbers: 16 and 45054 stamped inside. Do I order 39-205, 39-107FK, 39-232? Thank you for your advice.

My window has the below makings on the label. I have found on your website Sash Dyad Crank 39-187 and 39-188 Can you tell me if these are the correct replacements? NAMI NFRC 100 code- HII-280-1 spec-NFRC series-CLCASE mst- 280-M-006,7, 14,15 Cortilird HII-280 0.47-97

Good Day. I am looking for this type of Casement Window Operator. Could you recommend please ? Todd

Two windows that open from the left as you face them have roller wheels that come out of track. A) metal track at base of window is 11" and Truth & a house icon is on the track (see pic); B). Arm from wheel to crank is approximately 10"; C) top right piece of hardware towards window is 4 1/2".N ... (cont.)

Dual arm, scissors type, double hook, roto crank

Please see the attached pics from my customer looking for a replacement for their awning window cranks. Am I right in assuming that your 39-389 kit should work? I am not able to see any identifying numbers or markings anywhere.

I am looking for a Norco crank out window cranks handle part number 450112. Above are the photos of the handle. Thank you

I want to buy the windows lock (10 piece)and casement handle (2 piece) I will like to get installation instructionsApreciate your help Thank you My name is Guillerma

I am looking for this part #3850 - see attached photo below from your website (first photo). Do you have this in stock for left window (as viewed from exterior). See also photo of window from my home (second photo)

Hello, I need assistance with identifying and ordering the following parts: -Window crank (the only visible markings are "45054" on the underside). The crank has 12 teeth / splines. -The arm that moves when you turn the crank. The plastic roller on the end (which usually stays inside the housing a ... (cont.)

Trying to replace this window part

Hello! I know this is a truth hardware awning operator but I want to make sure I get the right one. Can you tell? This is an incredible feature on your site.

Need Truth Awning Operator 21 1/2 and Crank need part numbers to order

Am I correct to presume that your part# 39-365 is the direct replacement for my operator shown in the picture? The arm on my operator is 9 1/2" and the screw placement is the same as part# 39-365. Also, I need 10" hinges for these HURD windows. Would I be buying your part# 36-048?Thanks,John ... (cont.)