Viewing all customer Discussions for:

39-114L Crank Handle, 11/32"

We have new cranks TH 23077 (Right) & TH 23076 (left). We now need the window hinges. Attached are pictures & dimensions of our old. We only see 30744 on the hinge.... Please help Dimensions on ours is: Stationary window bracket- 7.3/4", swivel arm - 5.5" window track is 31" long ... (cont.)

looking for a left and right marvin integrity casement window operator. please help. photos attached

Hi ! I need to replace some broken and stripped operators but I am not sure of the part#. Could you point me in the right direction?

I am looking for a replacement on my window. Attached are photos. Thank you, Wendy

Parts described above have either been damaged, missing by abuse. I am hopeful that the above parts are the correct replacement parts. Truth (or Troth) is labeled on the Operator. the 4-7/16" and 10-3/4 dimensions have been verified by measurements. I am fairly confident that the subject parts are ... (cont.)

I need to replace a crank with left side handle cover and two 5" arms. Two photos attached showing my 30+ year old crank in some metallic color I cannot name. I'd probably prefer the clay color of those available in your current assortment.Thank you in advance for selecting the parts for the tota ... (cont.)

The brand is thruth

Hi, I'm needing a whole casement hardware operator set up for a weathershield window. Truth spit arm. Left hand in Champaign. operator, hinge system, top and bottom. I have attached pictures. Let me know if you need sizes or anything else.

Looking for the connector part(s) that mate the crank to the sill hardware. Thank you!

The window crank is fairly new. However, whoever installed, it did not screw in the cylinder that goes on top of the shaft, before the hand crank goes on. The window will crank out, but without that cylinder lock, it will not retract. I need to see if I can replace the cylinder lock. ... (cont.)

Looking for sill mounted LH approx 9.5" arm, dimensions 4" L x 1.5" W x 5/8" H, similar to Swisco 39-366

Please send me all information for parts listed

Hi ? we need help locating this part. Part Manufacturer: Truth 9 ½ inch Rear mount casement ? White

On photos, you can see all marks, which I have

Which handle goes with 39-031 operator, 39-104 or 39-114

Nami NFRC 100/200 Code:HII-1 Rating:NFRC Series:CLCASE NST:2650 NFRC HII-1-006-7/14-15 97M Window opens but will not close, crank spins with a clicking sound when trying to close. I *think* I need the part shown in the attached photo IMG_1245.jpeg, but please advise as to your opinion regarding ... (cont.)

I am looking for a truth window operator with the following information on the Entry Gard arms 20810 on the short arm with a right hand open and 40754 on the long arm . I would also like 3 handles for this operator along with a brown cover

This hardware is cracked. I cannot find a replacement

I have a casement window that has an operator that opens but does not close the casement window. I need to replace the casement operator. See photos to determine which casement operator is needed as a casement window operator replacement. Please, tell me which casement operator is needed to repla ... (cont.)

Hi, our home has a lot of 1995 Weather Shield casement windows with "Truth" hardware, which has become worn out. We would like to replace these cranking mechanisms. I need to find & buy the correct replacement parts! Thank you.