Viewing all customer Discussions for:

39-146 Andersen Window Crank, 4-1/2"

I need 3 left and 3 right anderson casement window crank assemblies. I do have knobs. the Gears are either completely dislodged or so sloppy the windows dont extend or retract. The pic is one of the ones that need to be replaced. Thanks

Hi, Is it possible to find a replacement for this window operator : Is it possible to find it in white color for part which is visible from the inside the room?

Hi do you have the cover for the window crank 39-146, separately? Thank you

Andersen window crank on arm there is the writing: "CW35, 4.5, 6 split. Installed around 1985. needs full replacement. I cannot see any other markings on the unit. Any help is appreciated.

Hello! A friend just gave me website and I'm hoping you can help us! We have several 30 year old Andersen windows with broken cranks and one with a broken casement part. If you could direct me to the correct parts I need, I would be most appreciative. One contractor told us we would have to replace ... (cont.)

Number on plastic says 7191-33

Hi guys, When I go to close this window the whole crank mechanism comes out of the housing. I assume this is the whole unit that needs to be replaced. Lmk what you think. Thank you Kris

Part needed. Andersen vent window positioned piece on bottom of window. This is a vintage vent window from early 1990's. The window type has a split arm operator that opens window to the right. Thank you.

Hi, I have 2 Anderson windows that do not crank properly. Please let me know the correct part numbers for replacement. One window is on the left side and the other on the right.

Just ordered what I need 39-146 My question is there a trick removing the bottom molding to be able to get to the mounting screws.

I need a replacement for the Andersen crank mechanism shown in the 3 images attached. The part has a number 1361318. Hope this is the part number.Please help.Thank you.Benjamin

in need of new hardware

Center shaft is damaged and pulls out on the old one, found something on your site similar to, but I'm not sure if it's the replacement part. Your size is showing 39?036 Anderson prank. Also need a new cover cap and small turn handle color champagne replacement parts. My name is Jeff. Look forwa ... (cont.)

I'm looking to replace, the damaged Anderson casement crank operator in this photo, I have measurements, I have use your site before. My name is Jeff

I am looking to replace the above window crank covers and screws

Hi: I need to order replacement parts for one of my Anderson Casement windows. I know I need 39-146 and a crank and cover. Do you also sell the small clips that are on the arms. I need one for the top arm that is connected to the window. Thank you, Erich

Looking for replacement cranks and hardware for Anderson windows. Both cranks and the hardware are broken on many of my windows. Has numbers 126 and 1361318 on hardware.

I just moved in a older house with 2 small casement windows , it's size about 20x46 I guessed, the right side window's crank handle operator is missing. The pictures from left and right window will be attached If you have that missing part from the right side window please kindly reply .Thank you v ... (cont.)

Hello, Could you please help me to identify this Andersen crank. We moved to a "new" house and need some window cranks to be repaired or replaced. I am trying to figure out out what parts I need for doing it myself. Thanks, George

Hello, I have a small child and Andersen casement windows that open outward. I'm looking for a sash stop device that will work with these windows. Could you recommend something? In the picture with my hand - where my thumb and pointer finger are touching are hard plastic, not wood. If the device ne ... (cont.)