Viewing all customer Discussions for:

39-147 Andersen Window Crank, 4-1/2"

I have Andersen split arm operator printed number 1361318 I want to order if you have it

I need to replace an Anderson operator. I looked under the operator and found no part numbers. This is what I have. It is stamped "Anderson Windowwall" The arm coming off the operator has the number 1361318 with an R stamped under it (I assume its because its opens to the right) and under the R ... (cont.)

I need to replace Anderson split arm window operator 1361316 and 1361318. Is this your 39-147? I also need the crank handles. Is there a style that folds back rather than sticking straight out of the window? How much would it be for both right and left operators and handles?

I have an Andersen window with two separate windows and separate handle and crank for them. If you are facing the window from the inside and looking at the handles, it is the right handle and crank. I need a whole new unit but I'm not sure I can identify the part number. The window is probably 15-20 ... (cont.)

Hello, I recently purchased a house and have been taking care of little things that are wrong with it now that I have moved in. I recently discovered that the crank for my window only functions in one direction (the crank will open the window but not close it). When you attempt to turn it in the ... (cont.)

Hi, I need to order a window crank for an Anderson window for a customer. Based on the pics provided, can you assist with the right part number to order? Thanks, Dave P

I have two bow windows both Anderson, one has a straight arm with 9 3/8" length and the screw holes are are about 3 7/8" apart, looking from inside the house i need the one for the left side of bow window? No. on arm 41. The other downstairs has a split arm and the holes are 3 7/8" apart,with the ... (cont.)

I have to replace the entire crank operator assembly on two lower lever andersen casement windows. I would like to replace the covers also. the only parts numbers I can see on what's left of the damaged mechanisism is 7168-18 & 7168-16. Part number 7168-16 also has a 2 stamped on it. The Andersem ... (cont.)

I have all the parts for a anderson split arm operator 1361318 and 1361210 rh hand bracket with post where does it attach on the sash. At one time I think the sash was replaced but the crank arms where never hooked up because there no holes for the bracket on the sash. please advise ... (cont.)

HELP!!! I am trying to replace all crank/hinge hardware on (7) left casement (20 inch) windows, and (5) right hand casement windows... The part number I see on the left ones are: 7168-18, and on the right 7168-16. I have ordered: Hinges 1361461 and 1361463 for the left windows, and 1361460 and 1 ... (cont.)

does the crank cover come with the crank

I need to replace a broken operator from a 1983 vinyl clad casement # 136 1313R. What is the correct CURRENT part number I need to order? Thanks KS

The housing for my left hand crank (from inside) Andersen window cracked. Looks like same issue as the Austintown Ohio customer. Can you look at these photos and tell me which operator is needed to repair?

Hi, When my Andersen windows were installed the plastic crank covers were never screwed down. They appear to be for your stock # 39-147 cranks. I have not been able to locate the screws ( the windows were installed ~20 years ago!) It is time to screw them down,(20 years of nagging is all I c ... (cont.)

I have casement windows throughout my house. All but two are 32 years old and work fine. Two were installed when I did a remodel using Anderson Perma-Shield. Neither has been used much - easily fewer than 100 operations, but both operators broke for the same reason. The Anderson design uses ... (cont.)

I have a large Casement window circa 1983 that needs all 4 crank, handle mechanisms replaced. Currently none, of the 4 casement windows can be opened using the cranks for various reasons; whether it's the handle missing, or the crank is cracked, or gears are stripped inside. I would like help in de ... (cont.)

We have a bay window in our living room and the cranks are not working. The home was built in the 70's and I do not know the brand of the window. Is there a way to find the brand name and do you have replacement parts that might work? Al

There is a photo of a patio glass door top view . Stabilizer type missing . Also there is photo of three other replacement parts needed. Anthony

Does part numbers 39-146 and part number 39-147 come with the crank operator cover or do they need to be purchased separately

How does the window trim covering the operator come off so I can replace the operator? I need to replace a casement window operator with a 39-147.