Viewing all customer Discussions for:

39-147 Andersen Window Crank, 4-1/2"

Both operators on my Andersen casement windows no longer work. The only part number I have is the one stated above. In looking on your web page I came across two assembles 39-146 and 39-147 left and right which seem like acceptable replacements. I assume I will need replacement crank handles as ... (cont.)

I ordered part 39-147 for my Andersen Window but it's not correct. Here is a photo of what I need. Can you help? Thank you!!

Hello, I am looking to replace the left Arm control of my Anderson Window. The Window Screen size is 20.5 feet x 55.5 feet. Kindly see attached. Thanks a million Remi

I'm looking for a part. The crank for the window stopped working. The only part I could find a number for was the outside casing, which said "Andersen 7191-33." However, it is the inside part (operator?) that may be a problem. I attached pictures to hopefully reveal what the problem might be and ... (cont.)

Hello, I need to replace the crank hardware for an Anderson window. I believe the windows were installed in the early 1990s. The photo shows that part of the plastic cover broke. This is not the main problem, however. When I turn the crank I can open the window but I cannot turn it to clos ... (cont.)

Hi. the part that help the handle to turn is not working. When I opened it up and looked inside, I realized that a flat piece is no longer attached that helps the cranking to take place. There is no connection to the round grooved part that looks like a wheel. I hope this is clear enough. Jul ... (cont.)

Kitchen window: This is just the first of my windows that can't open. On the moving section, says "Anderson 103).

Hi again Guys, Do these pics give enough info to tell the needed part?

Looking for the pictured part. Casement Operator Cover. Anderson Window. It has 7191-33 stamped on the inside. There is only one hole not 2 as pictured on your site. Also need operator handle. Need 3 of each. These are from at least pre-1987 manufactured windows.

So I have this anderson casement window, it cranks open, but not closed. The worm gear comes out when I try to crank the window closed. See pictures attached to determine which part/s I need. In addition, almost every cover is missing screws. I have 20 windows total which need screws, and ... (cont.)

Anderson cranks as pictured. Anderson Windowall 1361 back 1361316 7198-8

Hi, Please help me identify the right replacement operator for this Andersen casement window. Here are the numbers and such-- 12/15/95/1 1361322 CW35 CW6 LH CIG-3 1-96.6 High Performance IGMAC 4.5" apart screws Thanks!

Hi I am looking for this Anderson split arm. Sizes of the two sections of the arm are approximately 5" and 3". Showing is the left but I actually need the right. Thanks for your help.

Anderson part number stamped on operator arm is 1361316. Is your part number 39-146 exactly the same? Can I get it in white instead of stone?

is this 39-146?

I'm replacing my casement window operators 39-146 and 39-147. Do the covers come with the replacement kit? And crank handles are sold separately, correct?

the condo I recently bought was built in 2007, the Anderson operator assembly appears to be similar to the one listed as for windows built from 1982 to 1995. is there another operator or will the one listed work thanks . are there left/ right hand operators.

Andersen casement operatops right and left with plastic covers and t handles.....Casement number 1361316

I am trying to replace and Andersen operator c9400-1. I purchased part # 39-147 but it was the wrong part.Photos are attached. Do you have this part?

If I am standing inside, the window cranks out to the left, sash lock on the right, is this what I want..... Andersen Window Crank, 4 1/2" Product Code: 39-147