Viewing all customer Discussions for:

39-147 Andersen Window Crank, 4-1/2"

Number on plastic says 7191-33

I purchased a replacement mechanism 39-147 and it is the correct replacement part. However, there is another arm that is separate from the crank mechanism but which connects from the frame to the window which you don't show on the page for the mechanism. Do you sell that?

Hi guys, When I go to close this window the whole crank mechanism comes out of the housing. I assume this is the whole unit that needs to be replaced. Lmk what you think. Thank you Kris

Part needed. Andersen vent window positioned piece on bottom of window. This is a vintage vent window from early 1990's. The window type has a split arm operator that opens window to the right. Thank you.

Hi, I have 2 Anderson windows that do not crank properly. Please let me know the correct part numbers for replacement. One window is on the left side and the other on the right.

I need a replacement for the Andersen crank mechanism shown in the 3 images attached. The part has a number 1361318. Hope this is the part number.Please help.Thank you.Benjamin

in need of new hardware

I'm looking to replace, the damaged Anderson casement crank operator in this photo, I have measurements, I have use your site before. My name is Jeff

I am looking to replace the above window crank covers and screws

Part numbers on bottom of mechanism are: 7198-17, 7198-8,and maybe? 1361-18. Can the whole gear and arms be replaced? I think the windows were original in 1984? Thank you.

Looking for replacement cranks and hardware for Anderson windows. Both cranks and the hardware are broken on many of my windows. Has numbers 126 and 1361318 on hardware.

I just moved in a older house with 2 small casement windows , it's size about 20x46 I guessed, the right side window's crank handle operator is missing. The pictures from left and right window will be attached If you have that missing part from the right side window please kindly reply .Thank you v ... (cont.)

Hello, Could you please help me to identify this Andersen crank. We moved to a "new" house and need some window cranks to be repaired or replaced. I am trying to figure out out what parts I need for doing it myself. Thanks, George

Hello, I have a small child and Andersen casement windows that open outward. I'm looking for a sash stop device that will work with these windows. Could you recommend something? In the picture with my hand - where my thumb and pointer finger are touching are hard plastic, not wood. If the device ne ... (cont.)

Hello, I have these two windows and the assembly cover on the left window has broken and the worm gear can be removed. On the right hand gear assembly the cover is cracked and there is some play in the handle when opening/closing. 7191-33B is stamped on the inside of the cover. I think I need ne ... (cont.)

Need 5 of the large ones arm swing is 14 inches. Need 2 of the smaller one's

Please tell me the current replacement part for my casement window. I will nee 2 They are both stripped and are weather worn. Thanks for your help. Sandy

I have a pair of Anderson casement windows, one right opening and one left. The cranks are in the center of the windows. Looking to replace the bronze finish cranks with your folding cranks. Do they fit? Thanks!

The crank shown in for the attached Andersen window does not work in that it does not crank the window back in. It works cranking out, but window has to be pushed to get it closed again. Can you please identify the replacement part needed which we will then order from you?

Replacing Anderson casement crank