Viewing all customer Discussions for:

39-155 Caradco Window Crank, 9-1/2"

MY HOUSE WAS BUILT IN 1987 WITH SOME CRANK WINDOWS. 3 OF THE CRANKS HAVE PULLED OUT OF THE UNIT WHEN CLOSING. IS IT NECESSARY TO REPLACE THE WHOLE CRANK UNIT? 2 HINGE ON THE LEFT, 1 HINGES ON THE RIGHT. THANKS FOR YOUR HELP. SUSAN

Hi, I have a window with a Dashwood window crank. The number on the arm of the crank shows 20755. When I enter this number into your system it shows your part number as 39-155. Is this correct. Also, I'm not clear on the charges at the Canadian border. Would you have an idea what the ground sh ... (cont.)

Good Morning: Attached please find photographs of a broken window crank. The only identify marks are the numbers on the window hinge and MW on the plastic crank cover. The end of the spiral crank has broken off and I cannot close the window with the crank.

Part # 30748 along with 10" attached to window frame see images.

I'm looking for the following. Can you assist? Thank you Jim

Hi I have a number of windows that the crank to open the window no longer opens the window. Entryguard truth is stamped on the longer of the two arms. the longer arm is 9.5 inches and the shorter hinged am is 3 13/16 of an inch. I believe your product 39-155 and 39-156 seems to match the dimensions. ... (cont.)

I have three window operators that need replacement and, while the 39-155 and 39-156 appear to be close, they are not exact in appearance or measurement. I have attached photos of my operator. The measurements for this operator (in using your diagram for 39-156 as a guide) are as follows: From ... (cont.)

Hi Swisco. I have several casement windows with failed crank mechanisms. Most of them are a brand I don't recognize, with a "K/K" logo near the handle. (See attached photo.) They are wood windows. I also have several Andersen windows needing new assemblies. One is wood, the others are viny ... (cont.)

I have to replace the window crank for one of my Caradco casement windows and figure the other 3 windows are not in great shape either so I may as well have them all done at once. Thanks to your site I was able to identify the cranks for the kitchen windows, I believe they are 39-155 and 39-156 but ... (cont.)

The crank handle came out of the mechanism. The window is a side out (left to right). The crank cover lays up against the ledge. The cover looks like part 39-322, but it isn't brass. It looks like white metal. I don't have any pictures, but I can take some. The part that holds the crank agains ... (cont.)

I need help before ordering a replacement window crank. The number on the hinge is 20755. I think it's a 9 1/2". Please take a look at the attached photos.

I have about 5 wiBiltBest windows that do not close and open properly. They are roller openers. Please contact me

Hello, Trying to find correct replacement parts for Caradco casement windows. There are two different style operating mechanisms. The smaller bay window, has Truth hardware with # 30637 stamped on longest part,about 4 1/2". One of the other windows has Entry Guard Truth #20755 stamped on it ... (cont.)

I have a Caradco casement window. It opens but won't close. It does nopt appear that anything is stripped. House was built in 1996. Attached are some pics.

Hi, I have two wood Caradco casement windows that have stripped cranks. On the left window, the hardware part #s are 20755 and 40664 and the on the right window, the hardware part #s are 20755 and 30841. I was wondering what parts I need in order to make the windows operate properly again. Do I ... (cont.)

I have two Caradco casement windows which I can no longer open. The hand crank is stripped with the internal gears of the window. I see the number 20755 on the mechanism. I would like to order replacements for left and right configurations. Can my pictures help to identify what parts I need to o ... (cont.)

I am looking for replacement parts for two Caradco windows. I want to replace the assembly that opens the windows. Can you tell me what the part number is for this part and whether or not you supply this part. Thanks!

I have 3 Caradco windows that I need to buy replacement cranks for. I believe what I need are (2) 39-155's & (1) 39-156. My current cranks are stamped 20755 on the 3 13/16 arms. The short arms are all 3 13/16's long. I believe that the longer arms are all 10 1/2 long although they are hard to measur ... (cont.)

I need to sell a house with caradco 916 window that needs a crank handle. Does part number 39-339 work with part number 39-114L. The window has truth hinge number 20755

We have a casement window which needs a new crank. It is about 24yrs old made by Winchester / Bristol. I think it is about 31.1 inches wide per the sticker. We can't get the crank out easily and need feedback on that as well, but based on the attached images, can you assist us with determining which ... (cont.)