Viewing all customer Discussions for:

39-172 Truth Hardware Dyad Operator

I have many Shuco casement windows with Truth actuators. The rivets have rusted off where they attached to the bracket. The only thing stamped on them is the letter "B" which I assume means bottom. There are left and right windows and top and bottom brackets. The arms of the linkage measure 4, 5 and ... (cont.)

The attached pictures is for a left handed crank system (Active Co. NY) that I need to get three replacement. The measurements is 4" from left to right and the dept is 2 ½" inches

I can not find any markings on these. I also do not see any parts where the one arm is fixed to the window ledge? Can you help us identify the correct one we need? Just the teeth on the handle are stripped so not sure if just those can be replaced or if the entire thing needs replacement. ... (cont.)

Good morning, One of the rivets on the hardware has worried loosed and a temporary securing is holding for now. Can you recommend the proper replacement part? Thanks, Bryan

I need three replacement cranks for Weatherseal windows. One is for a smaller window, picture attached. The length of the crank is 10 inches for each of the two legs I need two cranks for a larger window, picture attached. The length of the legs are 5 inches d=for the cross piece na d4.5 inches for ... (cont.)

Looking for an exact replacement

I have four identical casement windows I need new window cranks for. The current cranks are double-hinge Truth cranks, and the arms are roughly 8'' long. Also, please explain how to measure the crank length so I can order the correct one.

Truth window operator crank.

The have two windows with these hinges labelled Truth 30905. The attached image is of the lower hinge attached on the right, but I actually need both the upper and lower hinges for the window with the hinge attached on the LEFT hand side. The house is about 30 years old and the sashes are wood. ... (cont.)

Hello,The window operator system that doesn't work and needs to be replaced with the new same system. please refer to the photo added.Just the window operator system we need to replace. Handle and handle cover are in good condition, but the system needs to be changed to the new same system.thank you ... (cont.)

One of the arms has the part number 30905 for a Truth window. However, the picture of the part that comes up does not match what is on there now. Pictures attached. Thank you in advance!

Hello Experts, Please kindly assist. Looking for advice on replacements to purchase. Thanks!

OUT OF MY MIND FOR OLD CASEMENT WINDOW PARTS

anyway reference code 36-048 where 1 of parts is 10inces long mine is 10.5 long . another 1 where it says yours 7 .5/8 mine is 6.3/8 or 6 .5 my says hg04-2000. also u send picture of code 39-172. where yours says 5 inches my is only 4 inches .also yours 3 1/8 mine 2 and half . in between screws y ... (cont.)

Need both right and left operatorThe # on the operator is 30908The arm is 4" from rivet to hole

Hello, I need three operator arms for two of my windows, mark: truth #30905, one right and two left and I don't seem to find where to order them for me to install them myself. Maybe you can help... I think the color might be a dark gold or green ...?

Looking to replace parts for truth window hinges, mounting bracket and lock hardware What may read is 40636 mounting bracket, but need lock to go with it, is there a complete? set I think the truth window hinges are part # 40887

My Aluminium Casement window has the following window hardware 1) Interlock 3905 window support 2)Truth winder ( US pat 36149905560082 ) Problem When open a small amount the wind will catch the window and open the window to 90%. In a strong breeze it acts like a sail and ww are fortunate that the ... (cont.)

Hi,I'm looking for replacement LH and Rh operators for my Truth casement windows. I would like operator, cover and cranks in matching color (which I believe is bronze). I'm not sure of the model - any help will be appreciated!Thanks,-Robert

I do not have much information about the cranks we need except for the fact that we need 2 left operators and 2 right ones. I believe they are split arm operators? I am not sure though.