Viewing all customer Discussions for:

39-176 Sash Crank Operator, Pella

For a casement style window

Hello, Are you able to help me replace the operator on an older Pella window? The photos attached are for the left window, I need the operator for the opposite, right window. I also need the wood molding cover. It's 31 1/4" Long. The sash size for reference is approximately 33 1/2" W x 56" H I a ... (cont.)

I need to replace the casement hardware on for sashes they oppose each other so it would be two left hand and two right hand and also need new crank handles for both.

?????

If you see the part that is conect to open to spin is broken if u can help me with this will great. Thank you

I need the plastic slide located at bottom of my Roto casement window. The slide travels along the bottom as the window is cranked open. Is this part available? Thanks, Ken

I need 2 of these that hinge on the left and open to left when looking out of the house and 1 that hinges on the right and opens to the right. Both handles are silver colored. Windows are Pella from 1994 Long straight arm is approx 11.5" Straight arm from window to bent arm is approx 5-5/8" End of b ... (cont.)

Please view the attached photo and let me know what you recommend. Larry

Window operator for Pella 1630CC2

I need the whole window control crank with. Double arms it's a pella Window which was installed in 78

I did not see precisely similar parts on Swisco's Pella page(s).I need what appears to be the white plastic (perhaps nylon) toothed glide and the double wheeled roller on which the sash rests. If it's needed, the sash glazing measures 29-1/4"x41-1/4". Mike

This is a picture of the roto operator I need. The one next to this one the shaft the crank fits on has broken off.

Hello, Can you identify this operator based on the attached pics? Thank you in advance, Tibor B

I am in need of this part for a Pella Window. Please tell me if you can help me.

Please see attached pictures. Pella windows were manufactured in 1974 per numbers found on sill, 704CC. Three of the four crank handles no longer work; however, one of the original cranks (stamped #4 on top, X-429 on bottom)fits and works flawlessly over the shaft/spline. Pella sent me two different ... (cont.)

looking to replace these operators, I Need 2 left and 2 right

slim shade operator

I need to replace the Hinge arm on my Pella casement window. It is about 4" long with 2 small wheels at the end with white plastic "teeth" attached to them.

Included are some photographs of the crank mechanism I need for my Pella windows please let me know what the item is so I can order it from you Steve

I need to replace this Pella casement operator. Can you please help identify the party?