Viewing all customer Discussions for:

39-187 Sash Dyad Crank, 5"

Please see pictures.

Hello, Inquiring as how to swap out the 5" arm on Product Code 39-187 with a 4-1/2" arm. Thank you!

Nami NFRC 100/200 Code:HII-1 Rating:NFRC Series:CLCASE NST:2650 NFRC HII-1-006-7/14-15 97M Window opens but will not close, crank spins with a clicking sound when trying to close. I *think* I need the part shown in the attached photo IMG_1245.jpeg, but please advise as to your opinion regarding ... (cont.)

Do you have this available as per attachment? Looking for 1 left and 1 right assembly. Thank you, My concern is the arm length and the correct zig zag. Thank you

please see attached photo. The arm is omly 4 1/2" and the holes are 5 " apart. I could not see anything on the websitePlease advise steve

Not sure if this is correct crank

Hi Folks, We have a vinyl double casement window made by NAMI. Approximately 35 years old? It has a Code# HII-280-1 Series CLCASE. We need the left and right hand window operators. Attached are the pictures of the left hand operator. Please ignore the ferrule nut on the inside. It is not factory. ... (cont.)

HelloI received order number 2125720 for parts 39-187 and 39 105 I have replaced these parts on another window in previous years and still is working well . this one i replaced and the retainer clip keep slipping off even after i lock in place i crank window in a few times and it slips and i have t ... (cont.)

Hello, I am missing the (correct) crank for this casement window. The post appears to be 1/4" or 5/16" in diameter. I am not sure of the brand of window, maybe Traco? Patrick

Below crank the is a extra screw hole. I just order and receive one from you. The first small bracket arm is a little longer

replacing a Dyad arm 5" arm with the numbers 30615 / 30814stamped inside

Hi, I need a replacement for my casement window. The window swings to the right. Thanks

I recently ordered part numbers 39-188 & 39-187 wanting to replace both crank handles in my daughters bedroom. Parts described have a total arm length of 5 inches. They are proper for a couple of my windows but the one needing to be replaced has a total arm length of approx 4-3/8" with the 5 inch ... (cont.)

Part #30866 is the same but the old one doesn't have part #40394 that is the middle piece. It's longer than the old one. I have the pictures of the model and size that I take from the window frame. How can match size? Please help me! Thank you

Canii get replacement for this.

These numbers on inside: 30614 30893 Pattern #4505601

Republic windows installed early 2000's

I will need to return the 2 cranks i ordered they where wrong. 39-090 and 39-089 my windows do not close all the way.

I have a potential republic window. I am missing the part that attaches to the window. I do not need the handle. I will also need 4 gaskets. There are 3 screws attaching the gear mechanism to the window. The two screws are 5" apart.

I've included all markings on the windows