Viewing all customer Discussions for:

39-205 Truth Folding Crank Handle, 11/32"

Good morning,We are looking to replace our Pozzi window cranks with the foldable kind. Do you have replacement foldable cranks we could purchase?Thanks so much,Dann

The gears are stripped inside need new crank handle off Truth swing out casement window

Silverline part 2108 ( left ) handle needed

I need replacement hardware for my window. Was able to see the words, Entry Gard Truth and the numbers L30841 and 20810. Please see attached photos.

Need part number s for left and right please.

Hello, 22 years ago I installed Silverline windows in the house I was building. I think that the UV rays or just age has caused many of these handle mechanisms to crack, keeping the window from opening. Do you have replacement mechanisms and new handles?

Hello, The worm gear that turns the cogs to open/close the window has become dislodged from its base. I see that there are matching grooves on the side of the worm gear housing and the internal aspect of the base. Can these two parts be put back together again by applying force to the worm gear t ... (cont.)

The crank assembly in pic 5705 will open but not close the window. When attempting to close, the handle screws out. The other photos are of the mitered lower trim pieces on the window exterior. The photos are of 2 different sized windows.

We just purchased the a house and the windows have no crank handles. I need to identify the type and get new handles.

I have two windows that are missing the stem, the cover, and the handle. I read a post from someone to Swisco that I may need to replace the EntryGard Dual Arm Operator, 39-031 and 39-032. I looked at it online and it shows that the long arm is 10 3/4" but mine is only approximately 9 1/2". The shor ... (cont.)

dropped the window when installing Ac and bent the operator arms.

Hi. I was hoping to replace all the crank handles with folding ones. Would like instructions and necessary part numbers if possible.

Need to replace rusted out mounting to crank arm?

Hello, I'm having trouble removing the cover from the old operator. I just wanted to quickly replace the cover and the crank, but it seems to be stuck. Additionally, one of the window arms is no longer connected to the pin, and I am having a hard time closing the window. Could you please point me t ... (cont.)

Looking for replacements. Not sure what I am looking for Thanks

Hello, I'm looking for a casement window crank replacement for my windows. The brand on the handle says Alcoa. There's a number engraved on there 30744. Looks to be 5 1/2" I'm hoping you can help me! Thank you!

I am looking for a truth brand dual arm window crank replacement I need about 4 of them. The long arm is 9-3/8" long and the short arm is 7-5/8" long. The base plate is 4-7/8" x 2-1/16". Can you please help me find these parts?

I have both right-handed and left-handed operators which I want to replace with white. I need 3 of each. In addition to the #45251 which is on each of them, there are additional printed numbers such as 07122002, 07152002 or 07292002. My belief is this is the 15.3 Traditional Split Arm Operator whic ... (cont.)

I am a home owner who needs two sets of operators with the rotogear and hinge for our Marvin casement windows

Hi, I'm trying to replace the window Operator the bolt's teeth in the second picture has snapped off and is stuck inside the third picture. The brand is by Allied Windows which has run out of business. Please let me know if you have this part. Thanks!