Viewing all customer Discussions for:

39-205 Truth Folding Crank Handle, 11/32"

Have 2 casement sash windows with Truth hardware. Operator on Right side is broken and I need replacement plus 3 sash locks. The photo is of the operational side but to show what we need. The other side that doesn't work has the little black part in the corner that seems to slide and isn't attach ... (cont.)

What is the best replacement

The crank does not close window. It will open but it skips, when taking the piece out that I'm holding in photos it appears damaged. Can you replace that piece I'm holding or do you need replace entire operator? Which swisco part would replace this ? The operator arms are approximately 11.5 inches ... (cont.)

I am searching for these, I need 4 rights, 4 lefts and 8 new cranks and covers. Can you help me?

Please advise where I can purchase the hinge for the window. Thank you

I need to replace the crank handle number 2108 and possibly the entire crank mechanism because of a heavily rusted crank arm. Do you have these parts?Thank you,Bert

I need a replacement for the opening hardware for the window in the attached picture. I have not been able to remove it yet. I'm hoping the pictures will be adequate for ordering the correct parts.Crestline Casement Window Hardware. Left hand open. House built in 1992.

Both the handle needs replaced and the gears in the dual arm operator are stripped. This is a Truth dual arm operator and I see part number 40471 on the metal hardware. So, what can I use to replace this?

Hello,I have four dual arm awning operators manufactured by Truth in my home. I believe the correct part number is 11.16.32.001 but I but I am not sure. A photo is attached. The hole to hole distance is 24".I would like to purchase the following. 1st choice: covers and nested folding cranks in white ... (cont.)

Hello Swisco,The Glass Guru of Carlsbad here. We need several of these for a customer, but we're going to start with one to try. EntryGuard by Truth, 4" straight arm, 9" long arm, 3 1/4" crooked arem, 5" bottom straight connector. Right side, including track on bottom of window.Can you find this, ... (cont.)

I believe i only need a handle but could be incorrect.Body number is op05-7553-02Handle number is op05-7810 i believe... photos attached.I have a few that need replaced.Please let me know. Thanks

I sent a previous email w/ o pics. Sorry. I ordered 2 39-035 thinking that this would also fit the Picture Window. My goof. The window is 65" tall x 18" wide. I'm helping my parents, can I return the extra 39-035 and place the order for this Crank and get refunded when u receive the Crank back? ... (cont.)

Not sure if this is considered left or right opening. # on gear plate is 40471. # on short arm is 20810. Only info on long arm is name "Entry Guard Truth", no #'s. Overall length is 13". Long arm 9". Short arm 4" (from hinge to end, not total length from gear. What is cost of replacement part? Will ... (cont.)

Need a crank for bath window,crank is located on the right vertical side,it's sandstone in color. Part number I see are-6 DN 04, 3850 and a name of " truth".

It looks like I can replace the whole crank assembly so if u could get me a part # and price that'd be great. If you need measurements let me know.

Looking for handles for my widows, both left and right side. They are aluminum and use a pin to connect.

I have casement windows with "K&K" hardware. I need to repalce the current bronze crank with a folding type handle. The new roll-down shades won't close completely with the current handle. The handle has a set screw and is 11/32' ID. The spindle (I think that is what you call it) has 12 teeth Thank ... (cont.)

Can ypu assist me with replacement handles or do i need to replace the entire body? It looks like handles only to me? Handle number is op05-7810 Body number is op05-7553-02 Almond Thanks so much for the help

Truth opener. 40351 on arm. Patent number4505601. Also has a 35 and the stamped on it. Broke the pin on the bracket that connects to windows

I am working on cleaning up the window cranks. We have several that the long screw attached to the crank won't turn to "close" the window or is missing the crank and long screw attachment. It looks like it is "stripped". Can the two parts be bought?