Viewing all customer Discussions for:

39-205 Truth Folding Crank Handle, 11/32"

I have a caradco 30382 however it is not 9 1/2" so the 39-028E and 39-027E will not work.Any thoughts?ThanksRocco

Opo5-7810 window crank and handle need replacement.

Hi, I need this whole thing. It's about 4" wide, extends all the way out about 8" It goes to my American Craftsman window from 2005. They do not stock them any longer.. Thanks !

NORCO casement window crank assy. for (JEL-N-555) ?

Need replacement parts. I removed a Truth 2 arm casement crank operator. Long arm has "Entry Gard" & heel to end 9 1/4". On top of crank plate 40254. Short arm 20544, Short arm 20544 lenght to bended connector 4 3/8". Bended short arm base 30630LH. Need Right hand and left hand. Name of c ... (cont.)

0P051506 and 0P05-7508-00 on the underside of operator. It has a male crank handle (39-226) which I purchased from you previously.

Thank you for offering this service! If you have this part and also the LH version, we will need to order several.

The rotating window crank gears are stripped. The hinges work fine after I added grease. Can I replace the crank or do I need the whole assembly? Can you identify the make/model?Here are the dimensions of the base of the crank in front of the window frame:- width (horizontal) is 5.5"- two screws (no ... (cont.)

The big arm says "Entry Gard Truth" on it. Small arm has #20810 on it. Measurements appear to match. I'm thinking this will work with Swisco Product code 39-032. Is that correct?

Need help locating new hardware for bedroom windows, attached are the cranks. I will need (2) left hand and (2) right hands.

I have a window in need of a new crank, about 25 yr. Old house. Number on the back of the arm is 40530 and number on the plate is 45047. Pivot point to middle of roller 9 3/8, plate is 4 3/4 by 1 1/4.Can you help me find this? Please and thank you.Njal

Hello, my window crank part # 0P05-1509 broke leaving the bottom piece lodged in the casement. In addition to the window crank arm I believe I need a #0P051505 casement assembly that has a #0P052020 arm . Can you help me select the proper replacement? Thank You, Sean B.

Trying to find replacement cranks for my older crestline casement windows . Windows to good to replace and have 3 of these crank assemblies (truth) that are worn out, can not find replacements. Any help pointing me in the right direction would be appreciated. Anything that would work even if I had t ... (cont.)

I would like to know if you carry this part?

Looking for a window crank assembly. U.S. patent number 4,241,541 It reads "Truth" as the brand. This one the short arm reads #30842R and after the joint, there is a second arm attached with # 20810 stamped in it. The larger arm is 9" from the gear to the center of the roller.The base has 7 holes an ... (cont.)

Original part is Truth EntryGuard 31538 (U.S. PAT 4,241,541), 90 degree opening. As photos shown. I also need a folding handle with cover to match the operator. If the folding handle can use as right and left hand opening, then I will need to 2 of them. Please let me know if you carry the same par ... (cont.)

My dual arms glide work just fine, but the operator is stripped. Do you handle that part? What's the point of having old windows that you can't open? Any assistance will be greatly appreciated.Pat

Malta window. Need crank and lock

Looking for one of these. It says Wright 2 on the back

Need to replace 15-20 window operators I have Wright 7701 on my windows Thanks