Viewing all customer Discussions for:

39-251 Crossly Window Crank

Bottom holes are 2 1/4 inches apart. The arm is 2 3/8 long Horizontal holes are 5 1/4 inches apart

Hi Team, I need some window operators to replace the part shown in the attached photos. Your help is greatly appreciated. Thanks! John

Need three right operators and one left operator for 45 year old windows. Want to buy one right initially to ensure fit and function. Arm length is 2-3/8" - not sure about thread dimension. C-C vertical length is 5-1/4". If colors are available, white is preferred. Only information on existing close ... (cont.)

I'm wondering about the new 39-025 arm link, it doesn't have the half moon cut out in the metal, it's solid. Will that interfere with the window closing? Sorry I'm a novice with repairs

I've been trying to find a window crank so I can fully close my windows. Unfortunately, I don't see any part numbers, and the part I ordered from Amazon, is not the correct fit. Please help? Thanks!

The units have right and left side cranks the spread from top screw to bottom screws is 4-3/4" center to center the windows were from the late 1950's. Are any of your products a match?Thank you,Frank

Because I repair my own awning windows, a friend asked for help on theirs.I have not found any identifying information on the window or operator. She has a whole houseful of these. The pattern on the operator housing is unlike any that I find online. If you need any further details, please let me ... (cont.)

I bought the 39-016 operator. It's a pretty close, but not a match to my original. What should I Do?

Hi all, Hoping to confirm a part number for 6 left hand replacements. Hole spacing is 1 1/8 x 5.25 with a 2 3/8 arm. Some of the arm attachments seem to be via c-clip and others by threaded grommet. Also looking for an extended or straight crank handle. One was installed in a corner beside a door ... (cont.)

I need 5 of therse window cranks IH CO 790.

This is from a house that was build in 1925. The arm that comes out of the box does not protrude out of the box when fully close which makes it difficult to identify the correct window operator. From what I could measure, the arm that is connected by the screw is about 2 3/8 in length.The space betw ... (cont.)

Please identify this part and I will buy a new one to replace it. Please let me know if you need more information

Hello, I am renovating a house down in Florida and am trying to make sure I get the correct parts for these window cranks which I would prefer to keep since they seem to work OK (though they have not been maintained). The link arm is 2 1/2" and the operator itself is 1 3/4" wide at the base and app ... (cont.)

-as shown in pictures: The part that moves with the handle) is shaped to curve facing up. My original handles all have that part curved to face down. When my original part is closed nothing sticks out. When the 39-026 closes there are gear teeth sticking out and because of this I just can not close ... (cont.)

I?m trying to repair an awning-style operator on my jalousie windows. The crank (pictured) keeps unscrewing from the operator when I try to close the windows, which makes me think I need to replace the screw itself, within the handle. If this is the case, can someone recommend the proper replacement ... (cont.)

need help finding this LEFT-HAND Awning Window Operator

The subject operator is depicted in the attached photos with the handle removed and sitting beside it on the windowsill. These are awning style windows from a house built in Broward Count, Florida in 1968. I noticed the window was slightly ajar and when I went to close it, the screw mechanism that t ... (cont.)

The measurements of the pictured part are the same as part number 39-025 with the exception of the measurement of the two holes at the bottom of the window crank operator. The pictured one seems to measure 1 1/8. Your replacement part measures 1 3/16. There are no marking other than those on the ... (cont.)

Hello, I am looking to replace several jalousie window cranks/assembly systems on my porch windows. I have a attached several photographs in an effort to determine what I need. The unit measure 5 7/8" in length. Thank you Eric